Home › Engine / Hybrid System › STOP AND START › STOP AND START SYSTEM › from 2022.11
RM38G0E _51 Engine / Hybrid System _101047 STOP AND START _0469044 STOP AND START SYSTEM C

STOP AND START  STOP AND START SYSTEM  P323A19  Backup Boost Converter "A" Circuit Current Above Threshold  


DESCRIPTION

A backup boost converter is built into the engine stop and start ECU.

The backup boost converter helps maintain battery voltage to prevent various functions from failing if power source voltage supplied from the backup boost converter drops due to the high electrical load when the engine is restarted by stop and start control.

The backup boost converter helps maintain the power source voltage if the battery voltage drops due to the high electrical load when the engine is restarted by stop and start control.

HINT:

A relay function and fuse function are provided in the backup boost converter.

If there is a malfunction in any of the electrical system circuits connected to the backup boost converter, the fuse and relay functions shut off the malfunctioning circuit to protect other circuits (remains shut off until next trip).

When the electrical system circuit is shut off, power to the circuit is cut off, causing any systems connected to the circuit to be disabled.

The fuse function is reset* when the ignition switch is turned off. If the malfunction still exists in the electrical system circuit that has been shut off by the relay function, it will be shut off again by the relay and fuse functions the next time the ignition switch is turned to ON.

*: A semiconductor fuse self resets according to electric signal.

The backup boost converter supplies power to:
·

Tire pressure warning system

·

Toyota multi operation touch system

·

Headup display system

·

Pre-Collision System

·

Air conditioning system

·

Parking support brake system

·

Vehicle stability control system

·

Navigation system

·

Lighting system



DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Note
P323A19 Backup Boost Converter "A" Circuit Current Above Threshold The following condition continues for 1 second or more (2 trip detection logic):
·

Overcurrent is detected at the B41, B42, B43 and IG41 terminals in the engine stop and start ECU


·

Engine stop and start ECU

·

Wire harness or connector

·

Tire pressure warning ECU and receiver

·

Integration control sub-assembly

·

Meter mirror sub-assembly

·

Millimeter wave radar sensor assembly

·

No. 2 air conditioning control assembly

·

Clearance warning ECU assembly

·

Air conditioning control assembly

·

No. 1 skid control ECU (brake booster with master cylinder assembly)

·

Radio receiver assembly

·

Multi-display

·

Integration control sub-assembly

·

Navigation ECU

·

No. 1 interior illumination light assembly (for driver side)

·

No. 1 interior illumination light assembly (for front passenger side)

·

No. 1 interior illumination light assembly LH

·

No. 1 interior illumination light assembly RH

·

Rear door inside handle illumination light assembly LH

·

Rear door inside handle illumination light assembly RH

·

Front door inside handle illumination light assembly LH

·

Front door inside handle illumination light assembly RH

·

Vanity light assembly (for LH side)

·

Vanity light assembly (for RH side)


Blinks SAE Code: P323A

CONFIRMATION DRIVING PATTERN

CONFIRMATION AFTER TROUBLESHOOTING


HINT:
·

If the cable is disconnected from the battery terminal, stop and start control is prohibited until refresh charge is completed.

In this case, let the vehicle idle to complete the refresh charge. The refresh charge is complete when the Data List item "Status of Battery Charge Control" changes from "Refresh Charge Mode". (Usually, idling the engine for 5 to 60 minutes with the battery fluid temperature at 11°C (52°F) or higher, the refresh charge will be completed.)

·

If the GTS is not available and the Data List item "Status of Battery Charge Control" cannot be checked, charge the battery by idling the engine for approximately 5 to 60 minutes or driving the vehicle, and then drive the vehicle and check that stop and start control operates.

If the engine is started with the hood open, the system determines that a jump start has occurred. Therefore, make sure that the hood is closed before starting the engine and driving the vehicle.

·

After the refresh charge completes, turnthe ignition switch off, wait for at least 30 seconds, and then start the engine again. If the vehicle enters refresh charge mode again while the engine is idling, the initial refresh charge did not properly complete, so wait for the refresh charge to complete.

·

Allow the engine to idle for 3 minutes after it is warmed up and check that the engine idle speed is within 50 rpm of the target idle speed.



a.

Clear the DTCs.

Powertrain > Stop and Start > Clear DTCs
50002 392

b.

Start the engine and warm it up.


c.

Drive the vehicle at 7 km/h (4.3 mph) or more.

CAUTION:

When performing Confirmation Driving Pattern, obey all speed limits and traffic laws.



d.

Depress the brake pedal and stop the vehicle.


e.

Keep the engine stopped by stop and start control for 1 second or more. (Keep the shift lever in D.)


f.

Release the brake pedal with the shift lever in D to start the engine.

HINT:

If the engine cranks slowly when the engine is restarted, it can be determined that the battery voltage is low.



g.

Check that DTCs are not output.

Powertrain > Stop and Start > Trouble Codes
50001 392


STOP AND START SYSTEM OPERATION CHECK


Click hereEngine / Hybrid System>STOP AND START>STOP AND START SYSTEM>OPERATION CHECK


WIRING DIAGRAM

A488185E02
0.135,7.656 0.448,7.854 0.313,0.198 10 false A 4.885,0.333 5.219,0.51 0.333,0.177 10 false 12 4.917,2.031 5.25,2.208 0.333,0.177 10 false 21 1.063,2.042 1.396,2.219 0.333,0.177 10 false 42 4.917,2.469 5.25,2.646 0.333,0.177 10 false 36 4.927,2.823 5.26,3 0.333,0.177 10 false 41 5.792,4.198 6.125,4.375 0.333,0.177 10 false 18 5.823,2.031 6.156,2.208 0.333,0.177 10 false 21 5.802,0.333 6.135,0.51 0.333,0.177 10 false 19 5.802,0.51 6.135,0.688 0.333,0.177 10 false I57 5.76,5.906 6.156,6.073 0.396,0.167 10 false B37 4.635,6.052 5.417,6.281 0.781,0.229 10 false BBC NO. 1 4.615,6.74 5.354,6.938 0.74,0.198 10 false BBC NO. 2 2.229,3.302 5.146,3.521 2.917,0.219 10 false Power Distribution Box Assembly 3.031,1.229 3.5,1.438 0.469,0.208 10 false ACC 3.854,0.667 4.573,0.875 0.719,0.208 10 false ECU-ACC 3.771,2.396 4.854,2.708 1.083,0.313 10 false ECU-IGR NO. 5 2.844,2.969 3.604,3.177 0.76,0.208 10 false IGR NO. 1 4.875,0.51 5.208,0.688 0.333,0.177 10 false 5B 4.896,2.229 5.229,2.406 0.333,0.177 10 false 5B 1.052,2.219 1.385,2.396 0.333,0.177 10 false 5B 4.896,2.646 5.229,2.823 0.333,0.177 10 false 5B 1.052,2.625 1.385,2.802 0.333,0.177 10 false 5B 4.896,2.979 5.229,3.156 0.333,0.177 10 false 5C 6.135,2.219 6.469,2.396 0.333,0.177 10 false IGR 6.146,4.385 6.479,4.563 0.333,0.177 10 false IGP 6.115,5.906 6.583,6.115 0.469,0.208 10 false BIN1 6.125,6.573 6.594,6.781 0.469,0.208 10 false BIN2 5.979,7.896 7.021,8.438 1.042,0.542 10 false Engine Stop and Start ECU 1.063,2.448 1.396,2.625 0.333,0.177 10 false 39 5.823,6.385 6.156,6.563 0.333,0.177 10 false 1 5.833,5.719 6.167,5.896 0.333,0.177 10 false 3 6.115,0.51 6.583,0.719 0.469,0.208 10 false ACC 4.563,4.552 5.677,4.792 1.115,0.24 10 false ECU-IGP NO. 3 3.26,5.135 4.021,5.344 0.76,0.208 10 false IGP NO. 1 0.906,7.677 1.24,7.854 0.333,0.177 10 false B 5.792,2.229 6.125,2.406 0.333,0.177 10 false I57 5.802,4.385 6.135,4.563 0.333,0.177 10 false I57 5.75,6.573 6.146,6.74 0.396,0.167 10 false B37 1.052,3.021 1.385,3.198 0.333,0.177 10 false 5B 1.052,2.844 1.365,3.042 0.313,0.198 10 false 11 1.438,2.385 2.198,2.594 0.76,0.208 10 false SMART 1.198,7.667 1.531,7.844 0.333,0.177 10 false C 2.24,7.667 2.573,7.844 0.333,0.177 10 false E 1.521,7.667 1.854,7.844 0.333,0.177 10 false D 3.99,4.292 4.146,4.49 0.156,0.198 10 false 5 3.073,4.302 3.229,4.5 0.156,0.198 10 false 3 3.99,4.719 4.146,4.917 0.156,0.198 10 false 2 3.073,4.719 3.229,4.917 0.156,0.198 10 false 1 5.448,1.01 5.604,1.208 0.156,0.198 10 false F 4.781,4.219 4.938,4.417 0.156,0.198 10 false 1 4.719,5.792 4.875,5.99 0.156,0.198 10 false 1 4.719,6.448 4.875,6.646 0.156,0.198 10 false 1 5.104,4.208 5.26,4.406 0.156,0.198 10 false 2 5.083,5.792 5.24,5.99 0.156,0.198 10 false 2 5.094,6.448 5.25,6.646 0.156,0.198 10 false 2 1.052,1.698 1.385,1.875 0.333,0.177 10 false 5K 0.344,0.635 0.979,1.031 0.635,0.396 10 false PDB-ALT NO. 2 0.24,1.188 0.573,1.365 0.333,0.177 10 false ALT 1.042,0.51 1.375,0.688 0.333,0.177 10 false 5H 0.396,1.844 0.969,2.104 0.573,0.26 10 false PDB-B 1.073,1.51 1.229,1.708 0.156,0.198 10 false 1 1.104,0.302 1.26,0.5 0.156,0.198 10 false 1 2.677,6.073 4.667,6.271 1.99,0.198 10 false SUB R/B NO. 1

A488186E01
0.177,1.094 0.49,1.292 0.313,0.198 10 false A 1.083,1.104 1.417,1.281 0.333,0.177 10 false B 5.896,4.375 6.229,4.552 0.333,0.177 10 false 19 2.667,1.813 3.135,2.021 0.469,0.208 10 false IGPD 0.469,7.677 1.844,7.906 1.375,0.229 10 false Battery 2.542,3.208 5.729,3.521 3.188,0.313 10 false Certification ECU (Smart Key ECU Assembly) 2.333,1.813 2.667,1.99 0.333,0.177 10 false I40 6.198,4.604 6.667,4.813 0.469,0.208 10 false DON2 6.031,7.521 7.073,8.188 1.042,0.667 10 false Engine Stop and Start ECU 2.677,2.198 3.146,2.406 0.469,0.208 10 false IGRD 2.688,2.906 3.156,3.115 0.469,0.208 10 false +B 2.667,2.563 3.135,2.771 0.469,0.208 10 false ACCD 2.354,1.635 2.688,1.813 0.333,0.177 10 false 24 5.813,4.604 6.302,4.833 0.49,0.229 10 false B38 1.083,6.573 1.417,6.75 0.333,0.177 10 false B42 3.146,5.219 3.458,5.417 0.313,0.198 10 false 1 3.948,6.417 4.281,6.594 0.333,0.177 10 false S25 4.021,5.896 4.438,6.094 0.417,0.198 10 false 15 2.333,2.188 2.667,2.365 0.333,0.177 10 false I40 2.333,2 2.667,2.177 0.333,0.177 10 false 11 2.323,2.563 2.656,2.74 0.333,0.177 10 false I39 2.344,2.375 2.677,2.552 0.333,0.177 10 false 21 2.323,2.927 2.656,3.104 0.333,0.177 10 false I39 2.375,2.75 2.708,2.927 0.333,0.177 10 false 6 1.375,1.094 1.708,1.271 0.333,0.177 10 false C 1.979,1.115 2.188,1.344 0.208,0.229 10 false E 3.792,5.635 4.125,5.813 0.333,0.177 10 false F 1.688,1.104 1.844,1.302 0.156,0.198 10 false D 4.24,6.417 5.625,6.802 1.385,0.385 10 false Stereo component equalizer assembly 2.656,5.313 3.271,5.51 0.615,0.198 10 false DON2 2.75,5.656 3.208,5.854 0.458,0.198 10 false ACC 3.156,5.563 3.313,5.76 0.156,0.198 10 false 3 2.75,6 3.208,6.198 0.458,0.198 10 false BO1 3.156,5.896 3.313,6.094 0.156,0.198 10 false 5 1.563,5.615 2.021,5.813 0.458,0.198 10 false BIN 1.563,6.073 2.021,6.271 0.458,0.198 10 false GND 1.333,5.99 1.49,6.188 0.156,0.198 10 false 6 1.292,5.531 1.604,5.729 0.313,0.198 10 false 11 0.635,5.781 1.552,5.979 0.917,0.198 10 false PA-BBC 1.094,6.781 3.49,7.271 2.396,0.49 10 false External Backup Boost Converter (Eco Run Vehicle Converter Assembly) 4.302,5.969 4.615,6.167 0.313,0.198 10 false +B 4.323,7.271 5.448,7.458 1.125,0.188 10 false +B *1 3.99,7.823 4.448,8.021 0.458,0.198 10 false S22 3.677,7.271 4.417,7.448 0.74,0.177 10 false 1*1 16*2 4.302,7.813 5.521,8.229 1.219,0.417 10 false Stereo Component Amplifier Assembly 4.323,7.458 5.948,7.656 1.625,0.198 10 false +B2 *2 4.146,8.323 6.896,8.521 2.75,0.198 10 false *1: for 14 Speaker 4.135,8.542 6.885,8.74 2.75,0.198 10 false *2: Except 14 Speaker

A488183E02
5.854,6.906 6.448,7.115 0.594,0.208 10 false GND2 5.583,6.719 5.802,6.948 0.219,0.229 10 false 2 5.49,6.927 5.979,7.135 0.49,0.208 10 false B37 5.49,7.542 5.99,7.76 0.5,0.219 10 false B37 5.49,8.219 6.01,8.427 0.521,0.208 10 false B38 5.573,7.323 5.792,7.552 0.219,0.229 10 false 8 5.583,8.031 5.802,8.26 0.219,0.229 10 false 6 5.854,7.542 6.448,7.75 0.594,0.208 10 false GND1 5.865,8.229 6.458,8.438 0.594,0.208 10 false DGND 5.521,0.76 6.031,0.969 0.51,0.208 10 false I57 0.552,4.125 3.906,4.375 3.354,0.25 10 false Millimeter Wave Rader Sensor Assembly *1 0.625,3.021 3.698,3.25 3.073,0.229 10 false Integration Control Sub-assembly *3 0.604,1.396 3.385,1.865 2.781,0.469 10 false Tire Pressure Warning ECU and Receiver 0.771,1.208 1.115,1.417 0.344,0.208 10 false T21 2.323,0.74 2.917,0.948 0.594,0.208 10 false IG 2.563,0.656 2.781,0.885 0.219,0.229 10 false 1 0.698,2.833 1.042,3.042 0.344,0.208 10 false I22 2.094,2.01 2.688,2.219 0.594,0.208 10 false ACC 2.51,2.229 2.729,2.458 0.219,0.229 10 false 4 5.865,0.75 6.458,0.958 0.594,0.208 10 false IG41 5.552,0.552 5.771,0.781 0.219,0.229 10 false 3 0.667,3.938 1.01,4.146 0.344,0.208 10 false A10 2.208,3.76 2.802,3.969 0.594,0.208 10 false IGB 2.521,3.646 2.781,3.875 0.26,0.229 10 false 8 0.656,5.177 3.625,5.427 2.969,0.25 10 false No. 2 Air Conditioning Control Assembly *2 0.688,5 1.031,5.208 0.344,0.208 10 false Q52 0.729,6.302 3.083,6.542 2.354,0.24 10 false Clearance Warning ECU Assembly 0.792,6.115 1.135,6.323 0.344,0.208 10 false I58 2.26,4.802 2.854,5.01 0.594,0.208 10 false IG 2.281,5.948 2.875,6.156 0.594,0.208 10 false IG 2.49,4.698 2.76,4.927 0.271,0.229 10 false 10 2.5,5.854 2.719,6.083 0.219,0.229 10 false 1 2.208,7.417 2.667,7.615 0.458,0.198 10 false IG+ 0.677,7.948 1.292,8.146 0.615,0.198 10 false I78 0.667,8.146 3.573,8.344 2.906,0.198 10 false Air Conditioning Control Assembly 2.49,7.635 2.802,7.833 0.313,0.198 10 false 16 5.698,9.115 6.99,9.656 1.292,0.542 10 false Engine Stop and Start ECU 0.188,9.146 4.531,9.417 4.344,0.271 10 false *2: w/ Rear Heater 0.167,8.802 3.958,9.031 3.792,0.229 10 false *1: w/ Pre-collision System 2.219,7.719 2.677,7.917 0.458,0.198 10 false +B 2.125,7.115 2.583,7.313 0.458,0.198 10 false ACC 2.521,7.031 2.833,7.229 0.313,0.198 10 false 7 2.531,7.333 2.844,7.531 0.313,0.198 10 false 8 3.625,9.042 3.906,9.229 0.281,0.188 10 false H 4.125,9.063 4.406,9.25 0.281,0.188 10 false I 5.094,1.521 5.375,1.708 0.281,0.188 10 false G 2.198,2.313 2.792,2.521 0.594,0.208 10 false IG+ 2.51,1.906 2.729,2.135 0.219,0.229 10 false 3 2.302,1.031 2.896,1.24 0.594,0.208 10 false +B 2.573,0.938 2.792,1.167 0.219,0.229 10 false 7 2.51,2.531 2.729,2.76 0.219,0.229 10 false 1 2.313,2.635 2.906,2.844 0.594,0.208 10 false B 0.188,9.5 4.24,9.719 4.052,0.219 10 false *3: w/ 12.3 Inch Display 4.448,9.052 4.729,9.24 0.281,0.188 10 false J

A488190E01
4.875,0.5 5.031,0.698 0.156,0.198 10 false I 4.854,9.104 5.01,9.302 0.156,0.198 10 false K 5.865,1.063 6.292,1.292 0.427,0.229 10 false B43 5.51,1.073 5.938,1.302 0.427,0.229 10 false I57 5.521,0.865 5.948,1.094 0.427,0.229 10 false 11 2.354,2.677 2.781,2.906 0.427,0.229 10 false B 2.531,3.76 2.958,3.99 0.427,0.229 10 false 2 0.813,2.813 1.24,3.042 0.427,0.229 10 false I17 0.813,3.031 3.885,3.313 3.073,0.281 10 false Meter Mirror Sub-assembly *1 0.802,4.052 1.229,4.281 0.427,0.229 10 false I61 0.74,4.219 3.427,4.719 2.688,0.5 10 false No. 1 Interior Illumination Light Assembly (for Front Passenger Side) 2.354,3.875 2.781,4.104 0.427,0.229 10 false B 2.542,2.583 2.969,2.813 0.427,0.229 10 false 2 0.74,5.708 3.385,6.208 2.646,0.5 10 false No. 1 Interior Illumination Light Assembly (for Driver Side) 0.792,5.51 1.219,5.74 0.427,0.229 10 false I62 2.542,5.26 2.969,5.49 0.427,0.229 10 false 2 2.354,5.354 2.781,5.583 0.427,0.229 10 false B 0.729,7.302 4.323,7.51 3.594,0.208 10 false No. 1 Interior Illumination Light Assembly LH 0.854,7.083 1.281,7.313 0.427,0.229 10 false i6 2.552,6.813 2.979,7.042 0.427,0.229 10 false 2 0.75,8.563 4.594,8.792 3.844,0.229 10 false No. 1 Interior Illumination Light Assembly RH 2.542,8.094 2.969,8.323 0.427,0.229 10 false 2 0.771,8.344 1.198,8.573 0.427,0.229 10 false h11 5.698,9.125 6.906,9.74 1.208,0.615 10 false Engine Stop and Start ECU 0.823,1.469 2.208,1.719 1.385,0.25 10 false Navigation ECU 0.823,1.271 1.25,1.5 0.427,0.229 10 false I21 2.271,1.042 2.698,1.271 0.427,0.229 10 false +B 2.531,0.958 2.958,1.188 0.427,0.229 10 false 10 0.125,9.458 3.531,9.719 3.406,0.26 10 false *1: w/ Headup Display 4.271,0.49 4.427,0.688 0.156,0.198 10 false J 2.323,2.375 2.75,2.604 0.427,0.229 10 false IG 2.531,2.26 2.958,2.49 0.427,0.229 10 false 1

A488191E02
4.854,0.406 5.01,0.604 0.156,0.198 10 false K 4.854,8.156 5.01,8.354 0.156,0.198 10 false L 2.365,1.104 2.521,1.302 0.156,0.198 10 false + 2.542,1.021 2.698,1.219 0.156,0.198 10 false 2 0.823,1.292 1.125,1.469 0.302,0.177 10 false P5 0.417,1.521 4.083,1.802 3.667,0.281 10 false Rear Door Inside Handle Illumination Light Switch LH 0.354,2.75 4.021,3.031 3.667,0.281 10 false Rear Door Inside Handle Illumination Light Switch RH 0.802,2.521 1.104,2.698 0.302,0.177 10 false O5 2.375,2.375 2.531,2.573 0.156,0.198 10 false + 2.542,2.281 2.698,2.479 0.156,0.198 10 false 2 0.302,3.927 3.969,4.208 3.667,0.281 10 false Front Door Inside Handle Illumination Light Switch LH 0.729,4.99 1.031,5.167 0.302,0.177 10 false M10 2.375,4.833 2.531,5.031 0.156,0.198 10 false + 2.552,3.479 2.708,3.677 0.156,0.198 10 false 2 0.323,5.198 3.99,5.479 3.667,0.281 10 false Front Door Inside Handle Illumination Light Switch RH 0.823,3.708 1.125,3.885 0.302,0.177 10 false N8 2.375,3.573 2.531,3.771 0.156,0.198 10 false + 2.542,4.76 2.698,4.958 0.156,0.198 10 false 2 0.958,6.5 4.625,6.781 3.667,0.281 10 false Vanity Light Assembly (for LH side) 2.635,6.135 2.938,6.313 0.302,0.177 10 false d5 3.031,6.125 3.333,6.302 0.302,0.177 10 false d9 2.542,5.938 2.844,6.115 0.302,0.177 10 false 1 *1 2.969,5.938 3.271,6.115 0.302,0.177 10 false 2 *2 2.958,7.063 3.26,7.24 0.302,0.177 10 false 2 *2 2.552,7.063 2.854,7.24 0.302,0.177 10 false 1 *1 2.625,7.26 2.927,7.438 0.302,0.177 10 false d4 3.031,7.26 3.333,7.438 0.302,0.177 10 false d8 0.99,7.625 4.656,7.906 3.667,0.281 10 false Vanity Light Assembly (for RH side) 0.083,8.906 3.75,9.104 3.667,0.198 10 false *1: for Bulb Type 0.083,9.24 3.75,9.438 3.667,0.198 10 false *2: for LED Type 2.313,6.125 2.469,6.323 0.156,0.198 10 false B 2.323,7.281 2.479,7.479 0.156,0.198 10 false B

A488184E02
2.229,0.24 2.792,0.438 0.563,0.198 10 false 1 2.198,1.25 2.5,1.458 0.302,0.208 10 false 14 2.229,3.083 2.5,3.281 0.271,0.198 10 false 45 2.625,4.375 2.781,4.573 0.156,0.198 10 false 6 2.604,7.219 2.76,7.417 0.156,0.198 10 false 4 2.583,7.927 3.01,8.104 0.427,0.177 10 false 15 *2 5.417,7.833 5.635,8.031 0.219,0.198 10 false 26 5.406,7.094 5.635,7.281 0.229,0.188 10 false 12 5.406,4.25 5.656,4.448 0.25,0.198 10 false 10 5.458,1.156 5.677,1.354 0.219,0.198 10 false 2 2.625,7.781 3.052,7.958 0.427,0.177 10 false 3 *1 2.01,0.354 2.281,0.552 0.271,0.198 10 false IG 1.948,3.177 2.229,3.365 0.281,0.188 10 false IG1 1.896,1.823 2.229,2.021 0.333,0.198 10 false IG1 2.344,4.469 2.625,4.656 0.281,0.188 10 false IG+ 2.281,7.313 2.677,7.51 0.396,0.198 10 false +B1 2.135,8.031 2.875,8.219 0.74,0.188 10 false ACC1 5.406,1.844 5.688,2.042 0.281,0.198 10 false I57 5.406,4.448 5.688,4.646 0.281,0.198 10 false I57 5.406,7.302 5.688,7.5 0.281,0.198 10 false I57 5.417,8.01 5.698,8.208 0.281,0.198 10 false I57 0.531,0.5 0.813,0.698 0.281,0.198 10 false I71 0.427,1.906 0.708,2.104 0.281,0.198 10 false B19 0.427,3.333 0.708,3.531 0.281,0.198 10 false B20 0.396,4.635 0.677,4.833 0.281,0.198 10 false I5 0.365,8.365 0.646,8.563 0.281,0.198 10 false I8*1 0.719,8.375 1.083,8.573 0.365,0.198 10 false I10*2 3.344,8.594 5.292,8.823 1.948,0.229 10 false *1: Except 14 Speaker 3.354,8.927 5.302,9.156 1.948,0.229 10 false *2: for 14 Speaker 5.708,8.417 6.979,8.99 1.271,0.573 10 false Engine Stop and Start ECU 0.365,8.594 3.292,8.813 2.927,0.219 10 false Radio Receiver Assembly 0.417,4.813 3.344,5.031 2.927,0.219 10 false Combination Meter Assembly 0.177,3.573 4.052,3.781 3.875,0.208 10 false No. 2 Skid Control ECU (Brake Actuator Assembly) 0.24,2.156 3.719,2.625 3.479,0.469 10 false No. 1 Skid Control ECU (Brake Booster with Master Cylinder Assembly) 0.438,0.677 4.01,0.875 3.573,0.198 10 false Power Steering ECU with Motor Assembly*3 5.729,7.99 6.469,8.177 0.74,0.188 10 false AC42 5.719,7.292 6.458,7.479 0.74,0.188 10 false B42 5.719,4.438 6.458,4.625 0.74,0.188 10 false IG12 5.729,1.833 6.469,2.021 0.74,0.188 10 false IG31 3.365,9.25 5.688,9.448 2.323,0.198 10 false *3: w/ Lane Tracing Assist System 5.417,1.354 5.698,1.552 0.281,0.198 10 false I57 5.406,1.646 5.625,1.844 0.219,0.198 10 false 23 5.74,1.344 6.479,1.531 0.74,0.188 10 false B41 4.823,0.479 4.979,0.677 0.156,0.198 10 false G 4.469,4.844 4.625,5.042 0.156,0.198 10 false L 4.469,6.656 4.625,6.854 0.156,0.198 10 false H 0.531,6.146 0.813,6.344 0.281,0.198 10 false I18 0.583,6.365 3.51,6.583 2.927,0.219 10 false Multi-display Assembly *4 2.042,5.594 2.323,5.792 0.281,0.198 10 false B 2.198,5.49 2.479,5.688 0.281,0.198 10 false 12 2.219,5.99 2.5,6.188 0.281,0.198 10 false 24 1.844,6.083 2.302,6.281 0.458,0.198 10 false ACC 1.813,1.365 2.271,1.552 0.458,0.188 10 false +BI1 2.208,1.76 2.51,1.969 0.302,0.208 10 false 31 3.365,9.542 5.615,9.771 2.25,0.229 10 false *4: for 12.3 Inch Display

CAUTION / NOTICE / HINT

NOTICE:
·

Before replacing the engine stop and start ECU, read the number of starter operations, total number of engine starts and write it into a new engine stop and start ECU.

Click hereEngine / Hybrid System>STOP AND START>STOP AND START SYSTEM>REGISTRATION

·

After replacing the engine stop and start ECU or air conditioning amplifier assembly, reset and perform learning of the air conditioning information in the engine stop and start ECU.

Click hereEngine / Hybrid System>STOP AND START>STOP AND START SYSTEM>REGISTRATION

·

After replacing the engine stop and start ECU assembly, perform learning of the external backup boost converter (eco run vehicle converter assembly).

Click hereEngine / Hybrid System>STOP AND START>STOP AND START SYSTEM>REGISTRATION

·

Inspect the fuses for circuits related to this system before performing the following procedure.



HINT:
·

If electrical load from additional devices installed to the vehicle (aftermarket audio system, etc.) is applied to the B41, B42, B43 or IG41 terminal in the engine stop and start ECU, the fuse function of the backup boost converter may operate.

If the fuse function of the backup boost converter operates, any systems connected to the B41, B42, B43 or IG41 terminal in the engine stop and start ECU will not operate.

·

DTCs for the stop and start system are not cleared even if the malfunction has been repaired. After repairing the malfunction, be sure to clear the DTCs.

·

Using the GTS, read the freeze frame data before troubleshooting. System condition information is recorded as freeze frame data the moment a DTC is stored. This information can be useful when troubleshooting.

Click hereEngine / Hybrid System>STOP AND START>STOP AND START SYSTEM>FREEZE FRAME DATA



PROCEDURE

1.CHECK HARNESS AND CONNECTOR (ENGINE STOP AND START ECU - BBC NO. 1, BBC NO. 2 FUSES)
a.

Disconnect the engine stop and start ECU connector.


b.

Remove the BBC NO. 1 and BBC NO. 2 fuses from the NO. 2 engine room relay block and junction block assembly.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(B37)Location & Routing

Click Connector(B37)Instrument Panel>Engine Room Main Wire / Heater Blower Wire>Engine Stop and Start ECU

B37-1 (BIN2) - BBC NO. 2 fuse terminal 2 Always Below 1 Ω
B37-3 (BIN1) - BBC NO. 1 fuse terminal 2 Always Below 1 Ω
B37-1 (BIN2) - Body ground Always 10 kΩ or higher
BBC NO. 2 fuse terminal 2 - Body ground Always 10 kΩ or higher
B37-3 (BIN1) - Body ground Always 10 kΩ or higher
BBC NO. 1 fuse terminal 2 - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

2.CHECK HARNESS AND CONNECTOR (ENGINE STOP AND START ECU - EACH ECU OR SENSOR)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

2.CHECK HARNESS AND CONNECTOR (ENGINE STOP AND START ECU - EACH ECU OR SENSOR)
a.

Disconnect the engine stop and start ECU connector.


b.

Disconnect the tire pressure warning ECU and receiver connector.


c.

Disconnect the integration control sub-assembly connector.


d.

Disconnect the meter mirror sub-assembly connector.


e.

Disconnect the No. 2 air conditioning control assembly connector.


f.

Disconnect the clearance warning ECU assembly connector.


g.

Disconnect the air conditioning control assembly connector.


h.

Disconnect the millimeter wave rader sensor assembly connector.


i.

Disconnect the No. 1 skid control ECU (brake booster with master cylinder assembly) connector.


j.

Disconnect the radio receiver assembly connector.


k.

Disconnect the multi-display connector.


l.

Disconnect the navigation ECU connector.


m.

Disconnect the No. 1 interior illumination light assembly (for driver side) connector.


n.

Disconnect the No. 1 interior illumination light assembly (for front passenger side) connector.


o.

Disconnect the No. 1 interior illumination light assembly LH connector.


p.

Disconnect the No. 1 interior illumination light assembly RH connector.


q.

Disconnect the rear door inside handle illumination light switch LH connector.


r.

Disconnect the rear door inside handle illumination light switch RH connector.


s.

Disconnect the front door inside handle illumination light switch LH connector.


t.

Disconnect the front door inside handle illumination light switch RH connector.


u.

Disconnect the vanity light assembly LH connector.


v.

Disconnect the vanity light assembly RH connector.


w.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

*1: for 12.3 Inch Display

*2: w/ Headup Display System

*3: w/ Pre-collision System

*4: w/ Rear Heater

*5: except 14 speaker

*6: for 14 speaker

*7: for Bulb type

*8: for LED type

Click Location & Routing(I57,T21,I22,I17,A10,Q52,I58,I78,B19,I8,I10,I18,I21,I61,I62,i6,h11,P5,O5,N8,M10,d5,d9,d4,d8)Location & Routing

Click Connector(I57)Instrument Panel>Instrument Panel Wire / Mobile Wireless Charger Cord / No. 1 Navigation Wire / No. 2 Instrument Panel Wire / No. 5 Instrument Panel Wire / Telephone Computer Wire>Engine Stop and Start ECU

Click Connector(T21)Body>No. 3 Floor Wire / Theft Warning Sensor Cord Sub-Assembly>Electrical Key & Tire Pressure Monitoring System Receiver Assembly

Click Connector(I22)Instrument Panel>Instrument Panel Wire / Mobile Wireless Charger Cord / No. 1 Navigation Wire / No. 2 Instrument Panel Wire / No. 5 Instrument Panel Wire / Telephone Computer Wire>Integration Control Sub-Assembly

Click Connector(I17)Instrument Panel>Instrument Panel Wire / Mobile Wireless Charger Cord / No. 1 Navigation Wire / No. 2 Instrument Panel Wire / No. 5 Instrument Panel Wire / Telephone Computer Wire>Meter Mirror Sub-Assembly

Click Connector(A10)Engine Compartment>No. 4 Engine Room Wire / Switch Wire>Millimeter Wave Radar Sensor Assembly

Click Connector(Q52)Instrument Panel>Floor Wire / No. 1 Cooler Wiring Harness Sub-Assembly>Cooler Control Switch Assembly

Click Connector(I58)Instrument Panel>Instrument Panel Wire / Mobile Wireless Charger Cord / No. 1 Navigation Wire / No. 2 Instrument Panel Wire / No. 5 Instrument Panel Wire / Telephone Computer Wire>Clearance Warning ECU Assembly

Click Connector(I78)Instrument Panel>Instrument Panel Wire / Mobile Wireless Charger Cord / No. 1 Navigation Wire / No. 2 Instrument Panel Wire / No. 5 Instrument Panel Wire / Telephone Computer Wire>Air Conditioning Control Assembly

Click Connector(B19)Engine Compartment>Engine Room Main Wire / Lamp Wire / No. 2 Engine Room Wire / No. 2 Lamp Wire / No. 3 Engine Room Wire / No. 6 Engine Room Wire / Washer Wiring Assembly>Brake Booster Control ECU (Brake Booster Assembly)

Click Connector(I8)Instrument Panel>Instrument Panel Wire / Mobile Wireless Charger Cord / No. 1 Navigation Wire / No. 2 Instrument Panel Wire / No. 5 Instrument Panel Wire / Telephone Computer Wire>Radio Receiver Assembly

Click Connector(I10)Instrument Panel>Instrument Panel Wire / Mobile Wireless Charger Cord / No. 1 Navigation Wire / No. 2 Instrument Panel Wire / No. 5 Instrument Panel Wire / Telephone Computer Wire>Radio Receiver Assembly

Click Connector(I18)Instrument Panel>Instrument Panel Wire / Mobile Wireless Charger Cord / No. 1 Navigation Wire / No. 2 Instrument Panel Wire / No. 5 Instrument Panel Wire / Telephone Computer Wire>Multi-Display Assembly

Click Connector(I21)Instrument Panel>Instrument Panel Wire / Mobile Wireless Charger Cord / No. 1 Navigation Wire / No. 2 Instrument Panel Wire / No. 5 Instrument Panel Wire / Telephone Computer Wire>Navigation ECU Assembly

Click Connector(I61)Instrument Panel>Instrument Panel Wire / Mobile Wireless Charger Cord / No. 1 Navigation Wire / No. 2 Instrument Panel Wire / No. 5 Instrument Panel Wire / Telephone Computer Wire>Foot Light RH (No. 1 Interior Illumination Light Assembly)

Click Connector(I62)Instrument Panel>Instrument Panel Wire / Mobile Wireless Charger Cord / No. 1 Navigation Wire / No. 2 Instrument Panel Wire / No. 5 Instrument Panel Wire / Telephone Computer Wire>Foot Light LH (No. 1 Interior Illumination Light Assembly)

Click Connector(i6)Seat>Front Seat Wire LH>Foot Light LH (No. 1 Interior Illumination Light Assembly LH)

Click Connector(h11)Seat>Front Seat Wire RH>Foot Light RH (No. 1 Interior Illumination Light Assembly RH)

Click Connector(P5)Body>No. 2 Rear Door Wire>Rear Door Inside Handle Illumination Light Assembly LH

Click Connector(O5)Body>No. 1 Rear Door Wire>Rear Door Inside Handle Illumination Light Assembly RH

Click Connector(N8)Body>Front Door Wire LH>Front Door Inside Handle Illumination Light Assembly LH

Click Connector(M10)Body>Front Door Wire RH>Front Door Inside Handle Illumination Light Assembly RH

Click Connector(d5)Body>No. 1 Roof Wire>Vanity Light Assembly LH

Click Connector(d9)Body>No. 1 Roof Wire>Vanity Light Assembly LH

Click Connector(d4)Body>No. 1 Roof Wire>Vanity Light Assembly RH

Click Connector(d8)Body>No. 1 Roof Wire>Vanity Light Assembly RH

I57-3 (IG41) - T21-1 (IG) Always Below 1 Ω
I57-3 (IG41) - I22-4 (IG+)*1 Always Below 1 Ω
I57-3 (IG41) - I17-1 (IG)*2 Always Below 1 Ω
I57-3 (IG41) - A10-8 (IGB)*3 Always Below 1 Ω
I57-3 (IG41) - Q52-10 (IG)*4 Always Below 1 Ω
I57-3 (IG41) - I58-1 (IG) Always Below 1 Ω
I57-3 (IG41) - I78-8 (IG+) Always Below 1 Ω
I57-2 (B41) - T21-7 (+B) Always Below 1 Ω
I57-2 (B41) - B19-14 (+BI1) Always Below 1 Ω
I57-12 (B42) - I8-4 (+B1)*5 Always Below 1 Ω
I57-12 (B42) - I10-4 (+B1)*6 Always Below 1 Ω
I57-11 (B43) - I18-12 (B)*1 Always Below 1 Ω
I57-11 (B43) - I21-10 (+B) Always Below 1 Ω
I57-11 (B43) - I17-2 (B)*2 Always Below 1 Ω
I57-11 (B43) - I78-16 (+B) Always Below 1 Ω
I57-11 (B43) - I22-1 (B)*1 Always Below 1 Ω
I57-11 (B43) - I61-2 (B) Always Below 1 Ω
I57-11 (B43) - I62-2 (B) Always Below 1 Ω
I57-11 (B43) - i6-2 Always Below 1 Ω
I57-11 (B43) - h11-2 Always Below 1 Ω
I57-11 (B43) - P5-1 (+) Always Below 1 Ω
I57-11 (B43) - O5-1 (+) Always Below 1 Ω
I57-11 (B43) - N8-1 (+) Always Below 1 Ω
I57-11 (B43) - M10-1 (+) Always Below 1 Ω
I57-11 (B43) - d5-1 (B)*7 Always Below 1 Ω
I57-11 (B43) - d9-2 (B)*8 Always Below 1 Ω
I57-11 (B43) - d4-1 (B)*7 Always Below 1 Ω
I57-11 (B43) - d8-2 (B)*8 Always Below 1 Ω
I57-3 (IG41) - Body ground Always 10 kΩ or higher
I57-2 (B41) - Body ground Always 10 kΩ or higher
I57-12 (B42) - Body ground Always 10 kΩ or higher
I57-11 (B43) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

3.CHECK ENGINE STOP AND START ECU

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

3.CHECK ENGINE STOP AND START ECU
a.

Disconnect the engine stop and start ECU connectors.

A436411C14
4.927,0.479 5.406,0.792 0.479,0.313 3.146,0.479 3.625,0.792 0.479,0.313 3.427,2.302 3.635,1.344 true 5.604,2.281 5.563,1.448 true 4.49,1.458 4.5,2.24 true 5.698,1.448 6.073,2.25 true 4.656,1.458 4.885,2.271 true 3.219,2.333 3.833,2.531 0.615,0.198 10 false DGND 5.469,2.333 6.083,2.5 0.615,0.167 10 false IG41 3.271,0.542 3.729,0.74 0.458,0.198 10 false B38 5.073,0.542 5.531,0.74 0.458,0.198 10 false I57 0.104,0.083 0.719,0.281 0.615,0.198 10 false *a 4.406,2.302 4.865,2.5 0.458,0.198 10 false B42 6.021,2.313 6.479,2.51 0.458,0.198 10 false B41 4.802,2.344 5.26,2.542 0.458,0.198 10 false B43
*a Component without harness connected
(Engine Stop and Start ECU)
- -



b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(I57,B38)Location & Routing

Click Connector(I57)Instrument Panel>Instrument Panel Wire / Mobile Wireless Charger Cord / No. 1 Navigation Wire / No. 2 Instrument Panel Wire / No. 5 Instrument Panel Wire / Telephone Computer Wire>Engine Stop and Start ECU

Click Connector(B38)Instrument Panel>Engine Room Main Wire / Heater Blower Wire>Engine Stop and Start ECU

I57-3 (IG41) - B38-6 (DGND) Always 10 kΩ or higher
I57-2 (B41) - B38-6 (DGND) Always 10 kΩ or higher
I57-12 (B42) - B38-6 (DGND) Always 10 kΩ or higher
I57-11 (B43) - B38-6 (DGND) Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

4.CHECK VEHICLE CONDITION (B41, B42, B43 AND IG41 CIRCUIT)

NG

4.CHECK VEHICLE CONDITION (B41, B42, B43 AND IG41 CIRCUIT)
a.

Check that additional devices installed to the vehicle (aftermarket audio system, etc.) are not connected to the B41, B42, B43 or IG41 terminal circuit of the engine stop and start ECU.

Result:
Result Proceed to
Load from an additional device installed to the vehicle (aftermarket audio system, etc.) is not applied. A
Load from an additional device installed to the vehicle (aftermarket audio system, etc.) is applied. B




A

TROUBLESHOOT ECUS CONNECTED TO TERMINALS B41, B42, B43 AND IG41

B

END (REMOVE ADDITIONAL DEVICE)