Home › Engine / Hybrid System › 1VD-FTV (ENGINE MECHANICAL) › DRIVE BELT
RM25T0E _51 Engine / Hybrid System _029207 1VD-FTV ENGINE MECHANICAL _0132950 DRIVE BELT A

1VD-FTV ENGINE MECHANICAL  DRIVE BELT  INSTALLATION  


PROCEDURE

Hide 16361A 1.INSTALL FAN AND GENERATOR V BELT

a.

Rotate the V-ribbed belt tensioner assembly pulley clockwise. Then install the fan and generator V belt as shown in the illustration.

NOTICE:

Check that the fan and generator V belt is properly set to each pulley.


A161800C01
1.583,0.417 1.75,0.417 1.75,0.417 2.167,1.167 true 1.167,0.667 1.333,0.667 1.333,0.667 1.667,1.333 true 0.5,1.385 1.25,1.385 true 0.5,1.917 1.25,1.917 true 5.667,1.917 6.417,1.917 true 2.75,1.917 2.75,2.5 true 2.042,2 2.042,2.583 true 2.75,1 3.5,1 true 0.688,0.104 1,0.26 0.313,0.156 10 false *A 3.688,0.104 4,0.26 0.313,0.156 10 false *B 1.438,0.323 1.75,0.479 0.313,0.156 10 false *1 1.01,0.573 1.323,0.729 0.313,0.156 10 false *2 0.354,1.292 0.667,1.448 0.313,0.156 10 false *3 0.344,1.823 0.656,1.979 0.313,0.156 10 false *4 3.521,0.917 3.833,1.073 0.313,0.156 10 false *5 1.969,2.594 2.281,2.75 0.313,0.156 10 false *6 2.677,2.51 2.99,2.667 0.313,0.156 10 false *7 6.448,1.833 6.76,1.99 0.313,0.156 10 false *8
*A w/ Air Conditioning System *B w/o Air Conditioning System
*1 Fan Pulley *2 V-ribbed Belt Tensioner Assembly
*3 Idler Pulley Sub-assembly *4 Generator Assembly
*5 Engine Water Pump Assembly *6 Crankshaft Pulley
*7 Cooler Compressor Assembly *8 Idler Pulley Assembly



Hide 17875 2.INSTALL INTAKE AIR CONNECTOR PIPE

Hide 17805 3.INSTALL INTAKE AIR CONNECTOR SUB-ASSEMBLY

Hide 17801 4.INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

Hide 17881 5.INSTALL NO. 1 AIR CLEANER HOSE