Home › Engine / Hybrid System › 1VD-FTV (ENGINE MECHANICAL) › FRONT CRANKSHAFT OIL SEAL
RM25T0E _51 Engine / Hybrid System _029207 1VD-FTV ENGINE MECHANICAL _0132953 FRONT CRANKSHAFT OIL SEAL A

1VD-FTV ENGINE MECHANICAL  FRONT CRANKSHAFT OIL SEAL  INSTALLATION  


PROCEDURE

Hide 11302A 1.INSTALL FRONT CRANKSHAFT OIL SEAL

a.

Apply engine oil to a new front crankshaft oil seal lip.


b.
A168402N01
1.417,4.417 1.583,4.417 1.583,4.417 2.083,3.667 true 1.125,4.323 1.583,4.521 0.458,0.198 10 false SST 0.833,1.958 1.063,2.146 0.229,0.188 10 false A

Using SST and a hammer, tap in the front crankshaft oil seal as shown in the illustration.

SST
09316-12010  
09950-70010  (09951-07100)
09950-60020  (09951-00890)

Standard depth A:

0.6 to 1.4 mm (0.0236 to 0.0551 in.)


NOTICE:

Make sure that the lip of the front crankshaft oil seal is properly installed.



Hide 16400 3.INSTALL RADIATOR ASSEMBLY