Wear protective gloves when removing the exhaust pipe.
The exhaust pipe is extremely hot immediately after the engine has stopped.
Confirm that the exhaust pipe has cooled down before removing it.
17705 1.REMOVE AIR CLEANER CAP SUB-ASSEMBLY WITH HOSE
17410 2.REMOVE FRONT EXHAUST PIPE ASSEMBLY
Remove the 3 nuts holding the front exhaust pipe assembly to the exhaust manifold assembly.
Remove the 2 bolts and 2 nuts from the center exhaust pipe assembly and front exhaust pipe assembly.
| *1 | No. 1 Exhaust Pipe Support |
| *2 | Front Exhaust Pipe Assembly |
Remove the 3 bolts and No. 1 exhaust pipe support from the cylinder block sub-assembly.
Remove the front exhaust pipe assembly and 2 gaskets.
25620 3.REMOVE EGR VALVE ASSEMBLY (w/ EGR System)
17167 4.REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR
Remove the 5 bolts and No. 1 exhaust manifold heat insulator.
5.REMOVE EXHAUST MANIFOLD ASSEMBLY
| *A | w/o EGR System |
| *B | w/ EGR System |
Remove the 12 nuts and exhaust manifold assembly.
Remove the 2 gaskets.
Remove the No. 2 exhaust manifold from the exhaust manifold assembly.
Remove the manifold collar from the exhaust manifold assembly.
Remove the 2 rings and 2 O-rings from No. 2 exhaust manifold.
The O-ring may not be able to be removed when hot, as the O-ring is made of rubber.
Clean the ring grooves of the No. 2 exhaust manifold.