Home › Engine / Hybrid System › 1HZ (ENGINE MECHANICAL) › FRONT CRANKSHAFT OIL SEAL
RM25T0E _51 Engine / Hybrid System _029355 1HZ ENGINE MECHANICAL _0133483 FRONT CRANKSHAFT OIL SEAL A

1HZ ENGINE MECHANICAL  FRONT CRANKSHAFT OIL SEAL  INSTALLATION  


PROCEDURE

Hide 11302A 1.INSTALL FRONT CRANKSHAFT OIL SEAL

a.

Apply MP grease to the lip of a new front crankshaft oil seal.

NOTICE:

Keep the lip free from foreign matter.



b.
A329202N01
0.688,0.958 0.927,0.958 0.927,0.958 1.229,1.167 true 0.375,0.885 0.708,1.104 0.333,0.219 10 false SST

Using SST and a hammer, tap in the front crankshaft oil seal until its surface is flush with the timing gear cover edge.

SST
09223-78010  


Hide 13471 2.INSTALL CRANKSHAFT PULLEY

a.

Install a new O-ring in the crankshaft pulley groove.


b.

Align the pulley set key with the key groove of the crankshaft pulley.


c.
A329216N01
1.063,1 1.813,1 true 0.76,0.927 1.073,1.125 0.313,0.198 10 false SST

Using SST and a hammer, tap in the crankshaft pulley.

SST
09214-60010  


d.
A329217C01
1.469,1.5 2.635,1.24 2.635,1.24 1.75,1.823 true 2.688,1.146 3.021,1.344 0.333,0.198 10 false SST 0.656,0.24 0.969,0.396 0.313,0.156 10 false *a
*a Hold


Using SST, install the crankshaft pulley with the plate washer and pulley set bolt.

SST
09213-58014  09330-00021  

Torque:
430 N*m (4385 kgf*cm, 317 ft.*lbf)


Hide 13477 3.INSTALL NO. 2 CRANKSHAFT PULLEY

a.

Install the No. 2 crankshaft pulley with the 6 bolts.

Torque:
24.5 N*m (250 kgf*cm, 18 ft.*lbf)


Hide 16711 4.INSTALL FAN SHROUD