16584 1.INSTALL RADIATOR MOUNTING INSULATOR
| *1 | No. 1 Radiator Support Collar |
| *2 | Radiator Mounting Insulator |
Install the 2 No. 1 radiator support collars and 2 radiator mounting insulators.
16611 2.INSTALL RADIATOR RESERVOIR BRACKET
Install the radiator reservoir bracket to the radiator assembly with the 2 bolts.
16400 3.INSTALL RADIATOR ASSEMBLY
| *1 | Support Collar |
| *a | Claw |
| *b | Specified Hole |
Insert the radiator assembly to the vehicle.
Do not damage the radiator core.
Set the support collar claws to the specified holes as shown in the illustration.
Install the radiator assembly with the 4 bolts.
16572D 4.INSTALL NO. 2 RADIATOR HOSE
Install the No. 2 radiator hose, and slide the 2 hose clamps to secure the hose.
16711 5.INSTALL FAN SHROUD
Install the fan pulley.
Place the shroud together with the coupling fan between the radiator assembly and engine.
Be careful not to damage the radiator core.
Temporarily install the fluid coupling fan to the engine water pump assembly with the 4 nuts. Tighten the nuts as much as possible by hand.
Attach the 2 hooks of the fan shroud to the radiator assembly as shown in the illustration.
Install the fan shroud with the 3 bolts.
Install the fan and generator V-belt.
Click hereEngine / Hybrid System>1HZ (ENGINE MECHANICAL)>DRIVE BELT>INSTALLATION
Tighten the 4 nuts of the fluid coupling fan.
16571C 6.INSTALL NO. 1 RADIATOR HOSE
Install the No. 1 radiator hose, and slide the 2 hose clamps to secure the hose.
88310A 7.INSTALL NO. 1 V BELT (w/ Air Conditioning System)
16470 8.INSTALL RADIATOR RESERVOIR ASSEMBLY
Install the radiator reservoir assembly with the 3 bolts.
Connect the reservoir hose to the radiator assembly.
53111 9.INSTALL RADIATOR GRILLE
10.ADD ENGINE COOLANT
11.INSPECT FOR COOLANT LEAK
51442 12.INSTALL NO. 2 ENGINE UNDER COVER