Home › Engine / Hybrid System › 1HZ (ENGINE MECHANICAL) › DRIVE BELT
RM25T0E _51 Engine / Hybrid System _029355 1HZ ENGINE MECHANICAL _0133487 DRIVE BELT A

1HZ ENGINE MECHANICAL  DRIVE BELT  INSTALLATION  


PROCEDURE

Hide 16361A 1.INSTALL FAN AND GENERATOR V BELT

a.

Install the fan and generator V belt.


b.
A329278C02
0.26,0.667 0.26,0.49 0.26,0.49 0.51,0.354 false 1.115,0.667 1.656,0.104 1.656,0.104 1.813,0.104 true 0.438,1.802 0.667,1.802 0.667,1.802 0.896,1.563 true 0.167,0.708 0.479,0.865 0.313,0.156 10 false *1 0.26,1.708 0.573,1.917 0.313,0.208 10 false *b 1.854,0.021 2.167,0.177 0.313,0.156 10 false *a
*1 Adjusting Bolt
*a for Bolt A
*b for Bolt B


While tightening adjusting bolt, adjust the tension of the fan and generator V belt.


c.

Tighten the bolts A and B.

Torque:
for bolt A : 19.6 N*m (200 kgf*cm, 14 ft.*lbf)
for bolt B : 59 N*m (602 kgf*cm, 44 ft.*lbf)


d.

Check the tension of the fan and generator V belt.

Click hereEngine / Hybrid System>1HZ (ENGINE MECHANICAL)>DRIVE BELT>ON-VEHICLE INSPECTION


Hide 88310A 2.INSTALL NO. 1 V BELT (w/ Air Conditioning System)

a.

Install the No. 1 V belt.


b.
A329274C01
1.74,0.823 2.354,0.458 2.354,0.458 2.531,0.458 true 0.708,1.729 0.958,1.729 0.958,1.729 1.406,1.406 true 2.573,0.385 2.885,0.542 0.313,0.156 10 true *2 0.521,1.656 0.813,1.875 0.292,0.219 10 false *1
*1 Nut
*2 Adjusting Bolt


While tightening adjusting bolt, adjust the tension of the No. 1 V belt.


c.

Tighten the nut.

Torque:
40 N*m (408 kgf*cm, 30 ft.*lbf)


d.