Home › Engine / Hybrid System › 1VD-FTV (LUBRICATION) › ENGINE OIL COOLER
RM25T0E _51 Engine / Hybrid System _029356 1VD-FTV LUBRICATION _0133491 ENGINE OIL COOLER A

1VD-FTV LUBRICATION  ENGINE OIL COOLER  REMOVAL  


PROCEDURE

Hide 51442 1.REMOVE NO. 2 ENGINE UNDER COVER

Hide 15690 4.REMOVE OIL COOLER RELIEF VALVE ASSEMBLY

A161990

a.

Remove the oil cooler relief valve assembly and gasket from the No. 1 oil cooler bracket.


Hide 15710 5.REMOVE OIL COOLER ASSEMBLY

A161991

a.

Remove the 2 bolts, 2 nuts, 4 washers, oil cooler assembly and 4 O-rings from the No. 1 oil cooler bracket.


Hide 15781 6.REMOVE NO. 1 OIL COOLER BRACKET

A164346

a.

Remove the bolt, washer, No. 1 oil cooler bracket and 3 gaskets from the oil pan sub-assembly.