Home › Engine / Hybrid System › 1HZ (COOLING) › THERMOSTAT
RM25T0E _51 Engine / Hybrid System _029524 1HZ COOLING _0133826 THERMOSTAT A

1HZ COOLING  THERMOSTAT  INSTALLATION  


PROCEDURE

Hide 16331A 1.INSTALL THERMOSTAT

a.

Install a new gasket to the thermostat.


b.
A326187C01
0.917,0.25 1.083,0.25 1.083,0.25 1.438,0.521 true 0.75,0.167 1.063,0.323 0.313,0.156 10 false *1 2.615,0.083 2.927,0.24 0.313,0.156 10 false *a 3.031,0.563 3.344,0.719 0.313,0.156 10 false *b
*1 Jiggle Valve
*a Upward
*b Front


Install the thermostat to the water inlet housing.

NOTICE:

The jiggle valve should be facing upward.



Hide 16321 2.INSTALL WATER INLET

a.
A328794

Install the water inlet to the water inlet housing with the 2 bolts.

Torque:
19.6 N*m (200 kgf*cm, 14 ft.*lbf)


b.
A328793

Install the bolt.

Torque:
19.6 N*m (200 kgf*cm, 14 ft.*lbf)


Hide 16572D 3.CONNECT NO. 2 RADIATOR HOSE

a.

Connect the No. 2 radiator hose to the water inlet, and slide the hose clamp to secure the hose.


Hide 51442 6.INSTALL NO. 2 ENGINE UNDER COVER