Home › Engine / Hybrid System › 1VD-FTV (EMISSION CONTROL) › EGR VALVE (w/o DPF)
RM25T0E _51 Engine / Hybrid System _029525 1VD-FTV EMISSION CONTROL _0133829 EGR VALVE(w/o DPF) A

1VD-FTV EMISSION CONTROL  EGR VALVE(w/o DPF)  INSTALLATION  


PROCEDURE

Hide 25685 1.INSTALL NO. 1 EGR COOLER GASKET

a.

Install a new No. 1 EGR cooler gasket to the EGR cooler assembly.


Hide 25630 2.INSTALL NO. 2 EGR VALVE ASSEMBLY

a.

Install the No. 2 EGR valve assembly to the EGR cooler assembly.


Hide 25620 3.INSTALL NO. 1 EGR VALVE ASSEMBLY

a.

Install the No. 1 EGR valve assembly to the EGR cooler assembly.


Hide 16268A 4.CONNECT WATER BY-PASS PIPE HOSE

a.
A331149

Connect the water by-pass pipe hose to the No. 2 EGR valve assembly, and slide the clamp to secure the hose.


Hide 16294 5.CONNECT NO. 11 WATER BY-PASS HOSE

a.
A331150

Connect the No. 11 water by-pass hose to the No. 1 EGR valve assembly, and slide the clamp to secure the hose.


Hide 16297B 6.INSTALL NO. 9 WATER BY-PASS HOSE

a.
A331148

Install the No. 9 water by-pass hose to the No. 1 EGR valve assembly and No. 2 EGR valve assembly, and slide the 2 clamps to secure the hose.


Hide 16281 7.INSTALL NO. 4 WATER BY-PASS HOSE

a.
A165500

Install the No. 4 water by-pass hose to the No. 3 water by-pass pipe, and slide the clamp to secure the hose.


Hide 25613 8.INSTALL NO. 3 EGR PIPE

a.

Install 2 new gaskets.


b.

Install the No. 3 EGR pipe with the 4 nuts and 4 bolts.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)


Hide 9.INSTALL EGR VALVE WITH EGR COOLER

a.

Install the EGR valve with EGR cooler with the 6 bolts.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)


Hide 25602 10.INSTALL NO. 2 EGR PIPE SUB-ASSEMBLY

a.
A332514C01
0.542,1.594 0.75,1.833 0.75,1.833 0.833,1.833 true 2.083,0.083 2.167,0.083 2.167,0.083 2.438,0.531 true 0.844,1.75 1.156,1.906 0.313,0.156 10 true *a 0.052,0.552 0.208,0.75 0.156,0.198 10 false A 1.25,1.833 1.406,2.031 0.156,0.198 10 false A 2.823,1.656 2.979,1.854 0.156,0.198 10 true B 2.354,0.01 2.51,0.208 0.156,0.198 10 true B 1.927,0 2.24,0.156 0.313,0.156 10 false *a
*a Claw


Install 2 new gaskets to the No. 2 EGR pipe sub-assembly.

HINT:

Make sure that the claw of the gasket faces the No. 2 EGR pipe sub-assembly.



b.

Install the No. 2 EGR pipe sub-assembly with the 4 bolts.

Torque:
29 N*m (296 kgf*cm, 21 ft.*lbf)

Bolt Length:
Item Length Thread Diameter
Bolt A 25 mm (0.984 in.) 8 mm (0.315 in.)
Bolt B 16 mm (0.630 in.) 8 mm (0.315 in.)



Hide 25601 11.INSTALL NO. 1 EGR PIPE SUB-ASSEMBLY

a.
A332515C01
0.656,0.438 0.917,0.167 0.917,0.167 1.083,0.167 true 1.833,2 2,2 2,2 2.708,1.281 true 1.083,0.083 1.396,0.24 0.313,0.156 10 true *a 2.323,0.25 2.479,0.448 0.156,0.198 10 true A 2.99,0.229 3.146,0.427 0.156,0.198 10 true A 0.708,1.323 0.865,1.521 0.156,0.198 10 true B 0.115,1.125 0.271,1.323 0.156,0.198 10 true B 1.667,1.917 1.979,2.073 0.313,0.156 10 false *a
*a Claw


Install 2 new gaskets to the No. 1 EGR pipe sub-assembly.

HINT:

Make sure that the claw of the gasket faces the No. 1 EGR pipe sub-assembly.



b.

Install the No. 1 EGR pipe sub-assembly with the 4 bolts.

Torque:
29 N*m (296 kgf*cm, 21 ft.*lbf)

Bolt Length:
Item Length Thread Diameter
Bolt A 25 mm (0.984 in.) 8 mm (0.315 in.)
Bolt B 16 mm (0.630 in.) 8 mm (0.315 in.)



Hide 16289 12.CONNECT NO. 5 WATER BY-PASS PIPE

a.

Connect the No. 5 water by-pass pipe with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


b.

Connect the 2 hoses to the No. 5 water by-pass pipe, and slide the 2 clamps to secure the hose.