Home › Engine / Hybrid System › 1HZ (LUBRICATION) › OIL PRESSURE SWITCH
RM25T0E _51 Engine / Hybrid System _029209 1HZ LUBRICATION _0133950 OIL PRESSURE SWITCH A

1HZ LUBRICATION  OIL PRESSURE SWITCH  INSTALLATION  


PROCEDURE

Hide 83530 1.INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

a.

Apply adhesive to 2 or 3 threads of the engine oil pressure switch assembly.

Adhesive:

Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent


NOTICE:

Do not apply adhesive to the oil inlet port of the engine oil pressure switch assembly.



b.

Install the engine oil pressure switch assembly.

Torque:
14.7 N*m (150 kgf*cm, 11 ft.*lbf)

NOTICE:

Do not start the engine within 1 hour after installation.



c.

Connect the engine oil pressure switch assembly connector.