Home › Engine / Hybrid System › 1GR-FE (ENGINE CONTROL) › CAMSHAFT OIL CONTROL VALVE
RM25T0E _51 Engine / Hybrid System _029758 1GR-FE ENGINE CONTROL _0135330 CAMSHAFT OIL CONTROL VALVE A

1GR-FE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  INSTALLATION  


PROCEDURE

Hide 15330B 1.INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1)

a.

Apply a light coat of engine oil to a new O-ring of the camshaft timing oil control valve assembly.


b.

Install the camshaft timing oil control valve assembly with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (surface which contacts the cylinder head).

·

Be careful that the O-ring is not cracked when installing the camshaft timing oil control valve assembly.




c.

Connect the camshaft timing oil control valve connector.


Hide 15340 2.INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2)

a.

Apply a light coat of engine oil to a new O-ring of the camshaft timing oil control valve assembly.


b.

Install the camshaft timing oil control valve assembly with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (surface which contacts the cylinder head).

·

Be careful that the O-ring is not cracked when installing the camshaft timing oil control valve assembly.




c.

Connect the camshaft timing oil control valve connector.


Hide 22030 3.INSTALL THROTTLE BODY WITH MOTOR ASSEMBLY