Home › Engine / Hybrid System › 1GR-FE (ENGINE CONTROL) › THROTTLE BODY
RM25T0E _51 Engine / Hybrid System _029758 1GR-FE ENGINE CONTROL _0135331 THROTTLE BODY A

1GR-FE ENGINE CONTROL  THROTTLE BODY  REMOVAL  


PROCEDURE

Hide 17705 2.REMOVE AIR CLEANER CAP SUB-ASSEMBLY WITH NO. 1 AIR CLEANER HOSE

Hide 22030 3.REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY

a.
A252967

Slide the 2 hose clamps and disconnect the No. 4 water by-pass hose and No. 5 water by-pass hose.


b.
A075599

Disconnect the throttle body with motor connector.


c.

Remove the 4 bolts and throttle body with motor assembly.


d.

Remove the gasket from the intake air surge tank.