Home › Engine / Hybrid System › 1GR-FE (ENGINE CONTROL) › KNOCK SENSOR
RM25T0E _51 Engine / Hybrid System _029758 1GR-FE ENGINE CONTROL _0135338 KNOCK SENSOR A

1GR-FE ENGINE CONTROL  KNOCK SENSOR  REMOVAL  


PROCEDURE

Hide 11101 1.REMOVE CYLINDER HEAD SUB-ASSEMBLY RH (for Bank 1)

Hide 16332 2.REMOVE NO. 1 WATER OUTLET PIPE

a.
A178539

Detach the 4 wire harness clamps.


b.

for Type A:

Remove the 3 bolts and No. 1 water outlet pipe.


c.

for Type B:

Remove the 2 nuts, bolt and No. 1 water outlet pipe.


Hide 3.REMOVE KNOCK SENSOR

a.
A075662

Disconnect the 2 knock sensor connectors.


b.

Remove the 2 bolts and 2 knock sensors.