Home › Engine / Hybrid System › 1GR-FE (ENGINE CONTROL) › CAMSHAFT POSITION SENSOR
RM25T0E _51 Engine / Hybrid System _029758 1GR-FE ENGINE CONTROL _0135348 CAMSHAFT POSITION SENSOR A

1GR-FE ENGINE CONTROL  CAMSHAFT POSITION SENSOR  INSTALLATION  


PROCEDURE

Hide 11301M 1.INSTALL VVT SENSOR (for Bank 2)

a.

Apply a light coat of engine oil to the O-ring of the VVT sensor.

NOTICE:
·

When reusing the VVT sensor, inspect the O-ring.

·

If the O-ring has scratches or cuts, replace the VVT sensor.




b.

Install the VVT sensor with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


c.

Connect the VVT sensor connector.


Hide 11301M 2.INSTALL VVT SENSOR (for Bank 1)

a.

Apply a light coat of engine oil to the O-ring of the VVT sensor.

NOTICE:
·

When reusing the VVT sensor, inspect the O-ring.

·

If the O-ring has scratches or cuts, replace the VVT sensor.




b.

Install the VVT sensor with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


c.

Connect the VVT sensor connector.


Hide 22030 3.INSTALL THROTTLE BODY WITH MOTOR ASSEMBLY