Home › Engine / Hybrid System › 1HZ (EMISSION CONTROL) › EGR VALVE
RM25T0E _51 Engine / Hybrid System _029769 1HZ EMISSION CONTROL _0135388 EGR VALVE A

1HZ EMISSION CONTROL  EGR VALVE  INSTALLATION  


PROCEDURE

Hide 25620 1.TEMPORARILY INSTALL EGR VALVE ASSEMBLY

a.

Temporarily install a new gasket and the EGR valve assembly to the No. 1 EGR pipe sub-assembly with the 2 nuts.


Hide 25620 2.INSTALL EGR VALVE ASSEMBLY WITH NO. 1 EGR PIPE SUB-ASSEMBLY

a.

Set a new gasket to the exhaust manifold.


b.
A331826C01
0.281,1.125 0.49,0.677 0.49,0.677 0.656,0.677 false 1.219,0.917 1.552,0.25 1.552,0.25 1.719,0.25 false 2.167,0.698 2.458,0.25 2.458,0.25 2.625,0.25 false 0.833,1.292 0.917,1.542 0.917,1.542 0.917,1.708 false 0.688,0.573 0.917,0.74 0.229,0.167 10 false *1 1.75,0.156 2,0.313 0.25,0.156 10 false *2 2.656,0.146 2.906,0.302 0.25,0.156 10 false *3 1.875,0.479 2.125,0.635 0.25,0.156 10 false x 2 2.813,0.521 3.063,0.677 0.25,0.156 10 false x 4 0.865,1.729 1.115,1.885 0.25,0.156 10 false *3
*1 Intake Air Connector
*2 EGR Valve Assembly with No. 1 EGR Pipe Sub-assembly
*3 Gasket


Temporarily install 2 new gaskets and the intake air connector, EGR valve assembly with No. 1 EGR pipe sub-assembly to the intake pipe with the 4 nuts.


c.

Temporarily install the 2 nuts.


d.
A331827N01
2.063,0.167 2.208,0.344 0.146,0.177 10 true A 3.229,0.365 3.375,0.542 0.146,0.177 10 true A 3.25,1 3.396,1.177 0.146,0.177 10 true A 2.698,1.125 2.844,1.302 0.146,0.177 10 true A 1.875,1.344 2.021,1.521 0.146,0.177 10 true B 1.885,0.354 2.031,0.531 0.146,0.177 10 true B 0.531,1.177 0.677,1.354 0.146,0.177 10 true C 0.542,1.813 0.688,1.99 0.146,0.177 10 true C

Uniformly tighten the 8 nuts.

Torque:
for nut A : 19.6 N*m (200 kgf*cm, 14 ft.*lbf)
for nut B : 20 N*m (204 kgf*cm, 15 ft.*lbf)
for nut C : 39.2 N*m (400 kgf*cm, 29 ft.*lbf)


Hide 17138A 3.INSTALL INTAKE PIPE STAY

a.

Temporarily install the intake pipe stay with the 2 bolts.


b.
A331821N01
1.688,1.833 1.844,2.031 0.156,0.198 10 true 1 1.073,1.531 1.229,1.729 0.156,0.198 10 true 2

Tighten the 2 bolts in the order shown in the illustration.

Torque:
19.6 N*m (200 kgf*cm, 14 ft.*lbf)


Hide 17705 4.INSTALL AIR CLEANER CAP AND HOSE SUB-ASSEMBLY