Home › Engine / Hybrid System › 1VD-FTV (FUEL) › FUEL TEMPERATURE SENSOR › 2014.08–2022.09
RM25T0E _51 Engine / Hybrid System _029770 1VD-FTV FUEL _0135399 FUEL TEMPERATURE SENSOR A

1VD-FTV FUEL  FUEL TEMPERATURE SENSOR  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, watching time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Hide 17940D 3.REMOVE INTERCOOLER ASSEMBLY

Hide 4.REMOVE FUEL TEMPERATURE SENSOR

A164254

a.

Disconnect the fuel temperature sensor connector.


b.

Using a 19 mm deep socket wrench, remove the fuel temperature sensor.


c.

Remove the O-ring from the fuel temperature sensor.