Home › Engine / Hybrid System › 1VD-FTV (FUEL) › FUEL COOLER(for Under Floor Side)
RM25T0E _51 Engine / Hybrid System _029770 1VD-FTV FUEL _0135401 FUEL COOLER(for Under Floor Side) A

1VD-FTV FUEL  FUEL COOLER(for Under Floor Side)  INSTALLATION  


PROCEDURE

Hide 23920A 1.INSTALL FUEL COOLER ASSEMBLY

a.
A272363N01
1.302,1.417 1.438,1.594 0.135,0.177 10 false 1 1.958,1.719 2.094,1.896 0.135,0.177 10 false 2 2.563,1.979 2.698,2.156 0.135,0.177 10 false 3

Attach the claw of the bracket to the hole in the frame.


b.

Temporarily install the fuel cooler assembly with the 3 bolts.


c.

Tighten the 3 bolts in the order shown in the illustration.

Torque:
19.5 N*m (199 kgf*cm, 14 ft.*lbf)


d.
A272364C01
2.676,0.883 2.859,1.046 0.183,0.162 10 *a 2.931,1.11 3.251,1.262 0.320,0.152 10 120° 2.806,1.346 2.877,1.202 2.877,1.202 2.924,1.202 false
*a Top


Connect the 2 fuel hoses to the fuel cooler assembly and fuel main tube sub-assembly, and slide the 2 clamps to secure the hoses.

HINT:

Make sure the clamp's directions are as shown in the illustration.