Home › Engine / Hybrid System › 1VD-FTV (FUEL) › FUEL SENDER GAUGE ASSEMBLY(for 90 L Tank Carried in Middle) › 2014.08–2016.08
RM25T0E _51 Engine / Hybrid System _029770 1VD-FTV FUEL _0135410 FUEL SENDER GAUGE ASSEMBLY(for 90 L Tank Carried in Middle) A

1VD-FTV FUEL  FUEL SENDER GAUGE ASSEMBLY(for 90 L Tank Carried in Middle)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL FUEL SENDER GAUGE ASSEMBLY

NOTICE:

If an fuel sender gauge assembly is removed from the fuel tank assembly, replace the fuel sender gauge assembly with a new one.


a.

Install a new fuel sender gauge assembly with the 5 screws.

Torque:
1.5 N*m (15 kgf*cm, 13 in.*lbf)


Hide 58325E 2.INSTALL REAR FLOOR SERVICE HOLE COVER

a.

Install the rear floor service hole cover with the 2 screws.