Wear protective gloves when removing the exhaust pipe assembly.
The exhaust pipe assembly is extremely hot immediately after the engine has stopped.
Confirm that the exhaust pipe assembly has cooled down before removing it.
17430 1.REMOVE TAILPIPE ASSEMBLY
Remove the 4 nuts and disconnect the 2 exhaust pipe support cushions.
Remove the 2 nuts and disconnect the exhaust pipe support cushion from the support bracket.
Remove the 3 bolts, 3 nuts and tailpipe assembly.
Remove the 4 nuts and 2 exhaust pipe support cushions from the tailpipe assembly.
Remove the 2 nuts and exhaust pipe support cushion from the muffler clamp bracket.
for Double Cab:
Remove the gasket from the No. 2 center exhaust pipe assembly.
except Double Cab:
Remove the gasket from the No. 3 center exhaust pipe assembly.
17404 2.REMOVE NO. 2 CENTER EXHAUST PIPE ASSEMBLY (for Double Cab)
Remove the 2 nuts, gasket and No. 2 center exhaust pipe assembly.
17407 3.REMOVE NO. 3 CENTER EXHAUST PIPE ASSEMBLY
Remove the 4 bolts, 4 compression springs and No. 3 center exhaust pipe assembly.
Remove the 2 gaskets from the center exhaust pipe assembly and No. 2 center exhaust pipe assembly.
17404 4.REMOVE NO. 2 CENTER EXHAUST PIPE ASSEMBLY
Remove the 2 nuts and disconnect the exhaust support cushion.
Remove the 2 bolts, 2 nuts, gasket and No. 2 center exhaust pipe assembly.
| *A | for Model Code #J78 Series | *B | for Model Code #J79 Series |
Remove the 2 nuts and exhaust pipe support cushion from the No. 2 center exhaust pipe assembly.
17420 5.REMOVE CENTER EXHAUST PIPE ASSEMBLY
Remove the 2 nuts and disconnect the exhaust pipe support cushion.
Remove the 2 bolts, 2 nuts, gasket and center exhaust pipe assembly.
| *A | for Model Code #J78 Series | *B | for Model Code #J79 Series |
Remove the 2 nuts and exhaust pipe support cushion from the center exhaust pipe assembly.
17420 6.REMOVE CENTER EXHAUST PIPE ASSEMBLY (for Double Cab)
Remove the 2 nuts and disconnect the exhaust pipe support cushion.
Remove the 4 bolts, 4 compression springs and center exhaust pipe assembly.
Remove the 2 gaskets from the front exhaust pipe assembly and front No. 2 exhaust pipe assembly.
Remove the 2 nuts and exhaust pipe support cushion from the center exhaust pipe assembly.
51447C 7.REMOVE TRANSFER CASE PROTECTOR
8.SUPPORT MANUAL TRANSMISSION WITH TRANSFER
Support the manual transmission with transfer with a transmission jack.
51203 9.REMOVE NO. 2 FRAME CROSSMEMBER SUB-ASSEMBLY
17450 10.REMOVE NO. 2 FRONT EXHAUST PIPE ASSEMBLY
| *A | for Double Cab |
| *B | except Double Cab |
for Double Cab:
Remove the 2 nuts and disconnect the exhaust pipe support cushion.
Remove the 2 bolts, 2 compression springs and No. 2 front exhaust pipe assembly.
Remove the gasket from the exhaust manifold sub-assembly LH.
for Double Cab:
Remove the 2 nuts and exhaust pipe support cushion from the No. 2 front exhaust pipe assembly.
17410 11.REMOVE FRONT EXHAUST PIPE ASSEMBLY
| *A | for Double Cab |
| *B | except Double Cab |
for Double Cab:
Remove the 2 nuts and disconnect the exhaust pipe support cushion.
Remove the 2 bolts, 2 compression springs and front exhaust pipe assembly.
Remove the gasket from the exhaust manifold sub-assembly RH.
for Double Cab:
Remove the 2 nuts and exhaust support cushion from the front exhaust pipe assembly.
for Double Cab:
Remove the 2 nuts, 2 bolts and exhaust pipe damper from the front exhaust pipe assembly.