23250 1.INSTALL FUEL INJECTOR ASSEMBLY
| *1 | O-Ring |
| *2 | Fuel Vibration Insulator |
Install a new fuel vibration insulator to each fuel injector assembly.
Apply a light coat of spindle oil or gasoline to new O-rings and install one to each fuel injector assembly.
Install the 6 fuel injector assemblies.
While turning each fuel injector assembly left and right, install it to the fuel delivery pipe sub-assembly.
Position the fuel injector connectors so they are facing outward.
23807 2.INSTALL FUEL DELIVERY PIPE SUB-ASSEMBLY
Place the fuel delivery pipe sub-assembly together with the 6 fuel injector assemblies on the intake manifold.
Temporarily install the 6 bolts, which are used to hold the fuel delivery pipe sub-assembly to the intake manifold.
Check that the fuel injector assemblies rotate smoothly.
If any fuel injector assembly does not rotate smoothly, replace the O-ring of that fuel injector assembly.
Position the fuel injector assemblies so that the connectors are facing outward.
Tighten the 6 bolts, which are used to hold the fuel delivery pipe sub-assembly to the intake manifold.
Connect the 6 fuel injector connectors to the fuel injector assemblies.
23802B 3.CONNECT NO. 2 FUEL PIPE SUB-ASSEMBLY
Connect the No. 2 fuel pipe sub-assembly to the fuel pressure regulator assembly.
Click hereEngine / Hybrid System>1GR-FE (FUEL)>FUEL SYSTEM>PRECAUTION
23801P 4.CONNECT NO. 1 FUEL PIPE SUB-ASSEMBLY
Connect the No. 1 fuel pipe sub-assembly to the fuel delivery pipe sub-assembly.
Click hereEngine / Hybrid System>1GR-FE (FUEL)>FUEL SYSTEM>PRECAUTION
17129 5.INSTALL INTAKE AIR SURGE TANK
6.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
7.INSPECT FOR FUEL LEAK