Home › Engine / Hybrid System › 1GR-FE (FUEL) › FUEL PRESSURE REGULATOR › 2014.08–2022.09
RM25T0E _51 Engine / Hybrid System _029892 1GR-FE FUEL _0135857 FUEL PRESSURE REGULATOR A

1GR-FE FUEL  FUEL PRESSURE REGULATOR  REMOVAL  


PROCEDURE

Hide 1. DISCHARGE FUEL SYSTEM PRESSURE

Hide 2. PRECAUTION

NOTICE:

After turning the ignition switch off, watching time may be required before disconnecting the cable from the battery teminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 3.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Hide 23802B 4.DISCONNECT NO. 2 FUEL PIPE SUB-ASSEMBLY

Hide 23280 5.REMOVE FUEL PRESSURE REGULATOR ASSEMBLY

a.

Disconnect the vacuum hose from the fuel pressure regulator assembly.


b.
A133700

Remove the 2 bolts and fuel pressure regulator assembly from the fuel delivery pipe sub-assembly.


c.

Remove the O-ring from the fuel pressure regulator assembly.