Home › Engine / Hybrid System › 1GR-FE (FUEL) › FUEL PRESSURE PULSATION DAMPER › 2014.08–2022.09
RM25T0E _51 Engine / Hybrid System _029892 1GR-FE FUEL _0135858 FUEL PRESSURE PULSATION DAMPER A

1GR-FE FUEL  FUEL PRESSURE PULSATION DAMPER  REMOVAL  


PROCEDURE

Hide 1. DISCHARGE FUEL SYSTEM PRESSURE

Hide 2. PRECAUTION

NOTICE:

After turning the ignition switch off, watching time may be required before disconnecting the cable from the battery teminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 3.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Hide 23270 4.REMOVE FUEL PRESSURE PULSATION DAMPER ASSEMBLY

a.
A157496C01
2.708,0.208 2.979,0.208 false 3.021,0.104 3.229,0.281 0.208,0.177 10 false *1
*1 Fuel Pressure Regulator Holder


Remove the fuel pressure regulator holder from the fuel pressure pulsation damper assembly.


b.

Pull the fuel pressure pulsation damper assembly out of the fuel delivery pipe sub-assembly.


c.

Remove the O-ring from the fuel pressure pulsation damper assembly.