Home › Engine / Hybrid System › 1GR-FE (FUEL) › FUEL SENDER GAUGE ASSEMBLY (for 90 L Tank Carried in Middle) › 2014.08–2016.08
RM25T0E _51 Engine / Hybrid System _029892 1GR-FE FUEL _0135869 FUEL SENDER GAUGE ASSEMBLY(for 90 L Tank Carried in Middle) A

1GR-FE FUEL  FUEL SENDER GAUGE ASSEMBLY(for 90 L Tank Carried in Middle)  INSTALLATION  


PROCEDURE

Hide 83320 1.INSTALL FUEL SENDER GAUGE ASSEMBLY

NOTICE:

If an fuel sender gauge assembly is removed from the fuel tank assembly, replace the fuel sender gauge assembly with a new one.


a.
A224485C01
1.833,0.833 2.083,0.417 2.083,0.417 2.25,0.417 true 2.323,0.323 2.635,0.563 0.313,0.24 10 false *1
*1 Wire Harness Clamp


Install a new fuel sender gauge assembly with the 5 screws to the fuel tank assembly.

NOTICE:

Make sure that the wire harness clamp is securely installed with the screw as shown in the illustration.



b.

Install the service hole cover with the 2 screws.


c.

Connect the fuel sender gauge connector and attach the fuel sender gauge connector clamp.


Hide 58901A 2.INSTALL REAR CONSOLE BOX SUB-ASSEMBLY (for Separate Seat Type)

a.

Install the rear console box with the 4 screws.