Home › Engine / Hybrid System › 1GR-FE (FUEL) › FUEL SENDER GAUGE ASSEMBLY (for 90 L Tank Carried in Rear) › 2014.08–2016.08
RM25T0E _51 Engine / Hybrid System _029892 1GR-FE FUEL _0135870 FUEL SENDER GAUGE ASSEMBLY(for 90 L Tank Carried in Rear) A

1GR-FE FUEL  FUEL SENDER GAUGE ASSEMBLY(for 90 L Tank Carried in Rear)  INSTALLATION  


PROCEDURE

Hide 83320 1.INSTALL FUEL SENDER GAUGE ASSEMBLY

NOTICE:

If an fuel sender gauge assembly is removed from the fuel tank assembly, replace the fuel sender gauge assembly with a new one.


a.
A220480C01
1.375,0.385 1.542,0.385 1.542,0.385 1.708,0.885 true 1.156,0.292 1.375,0.479 0.219,0.188 10 true *1
*1 Wire Harness Clamp


Install a new fuel sender gauge assembly with the 5 screws.

NOTICE:

Make sure that the wire harness clamp is securely installed with the screw as shown in the illustration.



b.

Connect the fuel sender gauge connector.


Hide 58325E 2.INSTALL REAR FLOOR SERVICE HOLE COVER

a.

Install the rear floor service hole cover with the 2 screws.