Home › Engine / Hybrid System › 1HZ (FUEL) › FUEL INJECTION NOZZLE
RM25T0E _51 Engine / Hybrid System _029893 1HZ FUEL _0136494 FUEL INJECTION NOZZLE A

1HZ FUEL  FUEL INJECTION NOZZLE  REMOVAL  


PROCEDURE

Hide 23701 2.REMOVE INJECTION PIPE SUB-ASSEMBLY

a.
A330936

Remove the 3 nuts and 3 injection pipe clamps.


b.

Using a 14 mm union nut wrench, loosen the 6 injection pipe union nuts on the nozzle holder and nozzle set side.


c.
A330937

Using a 14 mm union nut wrench, loosen the 6 injection pipe union nuts on the injection pump side.


d.

Remove the 6 nuts, 3 injection pipe clamps and 6 injection pipe sub-assemblies.


Hide 23760 3.REMOVE NOZZLE LEAKAGE PIPE ASSEMBLY

a.

Slide the clamp and disconnect the fuel hose from the nozzle leakage pipe assembly.


b.
A330938

Remove the 6 nuts, nozzle leakage pipe assembly and 6 gaskets.


Hide 23600 4.REMOVE NOZZLE HOLDER AND NOZZLE SET

a.
A330939N01
1.323,0.208 1.51,0.208 1.51,0.208 2.021,1.094 true 1,0.104 1.333,0.302 0.333,0.198 10 false SST

Using SST, remove the 6 nozzle holder and nozzle sets, 6 injection nozzle seats and 6 injection nozzle seat gaskets.

SST
09268-64010  

HINT:
A330940N01
0.865,1.688 1.021,1.885 0.156,0.198 10 false 2 0.323,1.688 0.479,1.885 0.156,0.198 10 false 1 1.406,1.688 1.563,1.885 0.156,0.198 10 false 3 1.948,1.688 2.104,1.885 0.156,0.198 10 false 4 2.49,1.688 2.646,1.885 0.156,0.198 10 false 5 3.031,1.688 3.188,1.885 0.156,0.198 10 false 6

Arrange the nozzle holder and nozzle sets in correct order.