Home › Engine / Hybrid System › 1HZ (FUEL) › FUEL TANK(for 90 L Tank Carried in Middle)
RM25T0E _51 Engine / Hybrid System _029893 1HZ FUEL _0136496 FUEL TANK(for 90 L Tank Carried in Middle) A

1HZ FUEL  FUEL TANK(for 90 L Tank Carried in Middle)  REMOVAL  


PROCEDURE

Hide 1.DRAIN FUEL

A221861

a.

Loosen the fuel tank drain plug, gasket and drain the fuel.


b.

Install the fuel tank drain plug and a new gasket.

Torque:
6.5 N*m (66 kgf*cm, 58 in.*lbf)


Hide 17430 2.REMOVE TAILPIPE ASSEMBLY

Hide 17420 3.REMOVE CENTER EXHAUST PIPE ASSEMBLY

Hide 37110 4.REMOVE PROPELLER SHAFT ASSEMBLY

Hide 77207B 5.REMOVE NO. 3 FUEL MAIN TUBE SUB-ASSEMBLY

a.
A334077

for Single Tank Type:

i.

Disconnect the 4 fuel hoses.


ii.

Remove the bolt and No. 3 fuel main tube sub-assembly.



b.
A334078

for Double Tank Type:

i.

Disconnect the 4 fuel hoses.


ii.

Remove the 2 bolts and No. 3 fuel main tube sub-assembly.



Hide 6.DISCONNECT FUEL MAIN HOSE

a.
A334079

Slide the clamp and disconnect the fuel main hose from the fuel suction tube assembly.


Hide 7.DISCONNECT FUEL RETURN HOSE

a.
A334080

Slide the clamp and disconnect the fuel return hose from the fuel suction tube assembly.


Hide 77213 8.DISCONNECT INLET FUEL HOSE

a.
A290461

Slide the clamp and disconnect the inlet fuel hose from the fuel tank assembly.


Hide 77100D 9.DISCONNECT FUEL BREATHER HOSE

a.
A290462

Slide the clamp and disconnect the fuel breather hose from the fuel tank assembly.


Hide 77100 10.REMOVE FUEL TANK

a.
A290463

Disconnect the fuel sender gauge connector.


b.

Set an engine lifter underneath the fuel tank.


c.
A290464

Remove the 2 bolts and separate the 2 fuel tank bands.


d.

Slightly lower the engine lifter.


e.

Remove the fuel tank protector from the fuel tank assembly.


Hide 77026A 11.REMOVE NO. 1 FUEL EVAPORATION TUBE SUB-ASSEMBLY

A334081

a.

Remove the 8 screws, 2 nuts and No. 1 fuel evaporation tube sub-assembly from the fuel tank assembly.


b.

Remove the 2 gaskets from the No. 1 evaporation tube sub-assembly.


Hide 77380 12.REMOVE FUEL CUT OFF VALVE ASSEMBLY

a.

Remove the fuel cut off valve assembly from the fuel tank assembly.


Hide 77420 13.REMOVE NO. 2 FUEL CUT OFF VALVE ASSEMBLY

a.

Remove the No. 2 fuel cut off valve assembly from the fuel tank assembly.


Hide 15.REMOVE FUEL SUCTION TUBE ASSEMBLY

A334082

a.

Remove the 5 screws and fuel suction tube assembly from the fuel tank assembly.


b.

Remove the gasket from the fuel suction tube assembly.


Hide 77011 16.REMOVE LOWER FUEL TANK FILLER PIPE SUB-ASSEMBLY

a.
A166810

Remove the 6 screws and lower fuel tank filler pipe sub-assembly.


b.

Remove the gasket from the lower fuel tank filler pipe sub-assembly.