Home › Engine / Hybrid System › 1VD-FTV (COOLING) › WATER PUMP
RM25T0E _51 Engine / Hybrid System _029897 1VD-FTV COOLING _0136549 WATER PUMP A

1VD-FTV COOLING  WATER PUMP  INSTALLATION  


PROCEDURE

Hide 16100 1.INSTALL ENGINE WATER PUMP ASSEMBLY

a.
A326759C01
1.354,1.448 1.51,1.646 0.156,0.198 10 false .
V100135

Bolt A
V100136

Bolt B
V100137

Nut


Install a new gasket and the engine water pump assembly with the 9 bolts and 2 nuts.

Torque:
24.5 N*m (250 kgf*cm, 18 ft.*lbf)

Bolt Length:
Item Length
Bolt A 30 mm (1.18 in.)
Bolt B 80 mm (3.15 in.)


NOTICE:

After installing all of the bolts and nuts, check that all of the bolts and nuts are tightened to the torque specification.



Hide 15777 2.CONNECT OIL COOLER HOSE

a.

Connect the No. 2 oil cooler hose to the engine water pump assembly and slide the hose clamp to secure the hose.


b.

Connect the No. 1 oil cooler hose to the engine water pump assembly and slide the hose clamp to secure the hose.


Hide 16307A 3.INSTALL FAN BRACKET SUB-ASSEMBLY

A326760C01
0,0 0,0 false
V100135

Bolt A
V100136

Bolt B


a.

Install the fan bracket sub-assembly with the 4 bolts.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)

Bolt Length:
Item Length
Bolt A 30 mm (1.18 in.)
Bolt B 80 mm (3.15 in.)



Hide 16331 4.INSTALL WATER OUTLET

a.
A264669

Install a new gasket to the water outlet as shown in the illustration.


b.

Connect the water outlet to the No. 2 water hose joint, and then install the water outlet with the 2 bolts.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)


c.

Slide the hose clamp to secure the No. 2 water hose joint.