Home › Engine / Hybrid System › 1VD-FTV (COOLING) › THERMOSTAT
RM25T0E _51 Engine / Hybrid System _029897 1VD-FTV COOLING _0136550 THERMOSTAT A

1VD-FTV COOLING  THERMOSTAT  REMOVAL  


PROCEDURE

Hide 51442 1.REMOVE NO. 2 ENGINE UNDER COVER

Hide 16571C 3.REMOVE NO. 1 RADIATOR HOSE

Hide 17881 4.REMOVE NO. 1 AIR CLEANER HOSE

Hide 6.REMOVE AIR CLEANER CASE SUB-ASSEMBLY

Hide 17805 7.REMOVE INTAKE AIR CONNECTOR SUB-ASSEMBLY

Hide 17875 8.REMOVE INTAKE AIR CONNECTOR PIPE

Hide 16470 9.REMOVE RADIATOR RESERVOIR ASSEMBLY

Hide 16711 10.REMOVE FAN SHROUD

Hide 16371 11.REMOVE FAN PULLEY

Hide 16572D 12.DISCONNECT NO. 2 RADIATOR HOSE

a.

Slide the hose clamp and disconnect the No. 2 radiator hose from the water inlet.


Hide 16603B 13.REMOVE IDLER PULLEY SUB-ASSEMBLY

A161934

a.

Remove the bolt and idler pulley sub-assembly.


Hide 16321 14.REMOVE WATER INLET

a.
A326763

Detach the clamp to disconnect the No. 2 oil cooler hose from the water inlet.


b.
A161935

Remove the 4 bolts and water inlet.


Hide 16331A 15.REMOVE THERMOSTAT

a.

Remove the thermostat and gasket.