1.DRAIN CLUTCH FLUID
31481J 2.DISCONNECT CLUTCH MASTER CYLINDER TO 2 WAY TUBE
Using a union nut wrench, disconnect the clutch master cylinder to 2 way tube.
Use a container to catch the fluid.
31301R 3.REMOVE TURN OVER SPRING SEAT COMPRESSION SPRING
31301A 4.REMOVE CLUTCH PEDAL SPRING (for 1GR-FE)
31410 5.REMOVE CLUTCH MASTER CYLINDER ASSEMBLY
Remove the clip, wave washer and clutch master cylinder push rod clevis pin.
Remove the 2 bolts and clutch master cylinder assembly.
31434 6.DISCONNECT CLUTCH RESERVOIR TUBE