Home › Drivetrain › CLUTCH › CLUTCH PEDAL (for LHD) › 2014.08–2017.01
RM25T0E _52 Drivetrain _029901 CLUTCH _0136564 CLUTCH PEDAL(for LHD) A

CLUTCH  CLUTCH PEDAL(for LHD)  REMOVAL  


PROCEDURE

Hide 1.DRAIN CLUTCH FLUID

Hide 31481 2.DISCONNECT CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE AND CLUTCH RESERVOIR TUBE

a.
C162776

Using a union nut wrench, disconnect the clutch master cylinder to flexible hose tube.

HINT:

Use a container to catch the fluid.



b.

Slide the clamp and disconnect the clutch reservoir tube from the clutch pedal support way.


Hide 86160 3.REMOVE FRONT NO. 1 SPEAKER ASSEMBLY

Hide 55480D 4.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

Hide 55844 5.REMOVE NO. 2 HEATER TO REGISTER DUCT

Hide 55833D 6.REMOVE NO. 1 INSTRUMENT PANEL REGISTER CONNECTOR (w/ Heater)

Hide 55107A 7.REMOVE CLUTCH PEDAL SUPPORT ASSEMBLY WITH CLUTCH MASTER CYLINDER

a.
C162777

Remove the 2 nuts, bolt and clutch pedal support assembly with clutch master cylinder.


Hide 31481J 8.REMOVE CLUTCH MASTER CYLINDER TO 2 WAY TUBE

a.
C163049

Using a union nut wrench, remove the clutch master cylinder to 2 way tube from the clutch master cylinder assembly and clutch pedal support way.


Hide 31331B 9.REMOVE CLUTCH PEDAL SUPPORT WAY

a.
C163051

Remove the clutch pedal support grommet.


b.

Slide the clamp and disconnect the clutch reservoir tube from the clutch pedal support way.


c.

Remove the screw and clutch pedal support way.


Hide 31301R 10.REMOVE TURN OVER SPRING SEAT COMPRESSION SPRING

a.
C163058

Move the pedal to the full stroke position.


b.

Remove the turn over spring seat compression spring.


Hide 31301A 11.REMOVE CLUTCH PEDAL SPRING (for 1GR-FE)

a.
C162779

Remove the 2 E-rings and clutch pedal spring with spacer.


b.

Remove the spacer from the clutch pedal spring.


Hide 31410 12.REMOVE CLUTCH MASTER CYLINDER ASSEMBLY

Hide 31434 13.REMOVE CLUTCH RESERVOIR TUBE

a.
C310579

Slide the clamp and disconnect the clutch reservoir tube from the clutch master cylinder assembly.


Hide 31301 14.REMOVE CLUTCH PEDAL SUB-ASSEMBLY

a.
C163053

Remove the nut and bolt.


b.

Remove the clutch pedal sub-assembly from the clutch pedal support sub-assembly.


Hide 31321 15.REMOVE CLUTCH PEDAL PAD

Hide 31324A 16.REMOVE CLUTCH PEDAL SHAFT COLLAR

a.
C163055

Remove the clutch pedal shaft collar from the clutch pedal sub-assembly.


Hide 31301C 17.REMOVE CLUTCH PEDAL BUSH

a.
C163054

Remove the 2 clutch pedal bushes from the clutch pedal sub-assembly.


Hide 31301B 18.REMOVE NO. 1 CLUTCH PEDAL CUSHION

a.
C163082

Remove the No. 1 clutch pedal cushion from the clutch pedal sub-assembly.


Hide 31301P 19.REMOVE CLUTCH PEDAL TURNOVER BUSH

a.
C163056

Remove the clutch pedal turnover bush from the clutch pedal sub-assembly.


Hide 31453B 20.REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS BUSH

a.
C163057

Remove the clutch master cylinder push rod clevis bush from the clutch pedal sub-assembly.


Hide 31353 21.REMOVE CLUTCH PEDAL SPRING HOLDER

a.
C163059

Remove the clutch pedal spring holder from the clutch pedal support sub-assembly.


Hide 31301F 22.REMOVE CLUTCH PEDAL STOPPER BOLT

a.
C163052

Loosen the lock nut and remove the clutch pedal stopper bolt.


b.

Remove the lock nut from the clutch pedal stopper bolt.