1.REMOVE MANUAL TRANSMISSION ASSEMBLY
31204 2.REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY
Remove the clutch release fork sub-assembly and clutch release bearing assembly from the clutch housing.
31230 3.REMOVE CLUTCH RELEASE BEARING ASSEMBLY
Remove the release bearing hub clip and clutch release bearing assembly from the clutch release fork sub-assembly.
31126 4.REMOVE CLUTCH RELEASE FORK BOOT
31236B 5.REMOVE RELEASE FORK SUPPORT
Remove the release fork support from the manual transmission assembly.
31210 6.REMOVE CLUTCH COVER ASSEMBLY
| *a | Matchmark |
Put matchmarks on the clutch cover and flywheel.
Loosen each set bolt one turn at a time until spring tension is released.
Remove the 6 set bolts and pull off the clutch cover assembly.
Do not drop the clutch disc.
31250 7.REMOVE CLUTCH DISC ASSEMBLY
Keep the lining part of the clutch disc, the pressure plate and the surface of the flywheel away from oil and foreign matter.
33311W 8.INSPECT INPUT SHAFT BEARING