19850 1.INSTALL GLOW PLUG ASSEMBLY
Clean the glow plug assembly and glow plug hole.
| *a | 12 Thread Roots |
Apply adhesive to 3 or more thread roots in the area shown in the illustration.
Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent
Using a 10 mm deep socket wrench, install the 8 glow plug assemblies.
19871 2.INSTALL NO. 1 GLOW PLUG CONNECTOR
Install the 2 No. 1 glow plug connectors by uniformly tightening the 8 nuts.
Install the 8 glow plug screw grommets.
Connect the 2 wire harnesses with the 2 nuts and 2 glow plug screw grommets.
3.INSTALL INJECTION PIPE