1. PRECAUTION
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
28800 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
25680 3.REMOVE EGR VALVE WITH EGR COOLER
23920A 4.DISCONNECT FUEL COOLER ASSEMBLY
28100 5.REMOVE STARTER ASSEMBLY
Detach the harness clamp and disconnect the wire harness.
Disconnect the starter connector.
Remove the nut and disconnect the starter wire.
Disconnect the 2 hoses.
Remove the 2 bolts and starter assembly.