Home › Engine / Hybrid System › 1VD-FTV (FUEL) › FUEL COOLER (for Engine Room Side) › 2014.08–2017.01
RM25T0E _51 Engine / Hybrid System _029770 1VD-FTV FUEL _0135400 FUEL COOLER(for Engine Room Side) A

1VD-FTV FUEL  FUEL COOLER(for Engine Room Side)  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, watching time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Hide 17940D 4.REMOVE INTERCOOLER ASSEMBLY

Hide 23805B 8.REMOVE NO. 5 FUEL PIPE SUB-ASSEMBLY

Hide 23274D 9.REMOVE NO. 3 FUEL HOSE

A164187

a.

Slide the clamp and remove the No. 3 fuel hose from the fuel cooler.


Hide 16283 10.REMOVE NO. 6 WATER BY-PASS HOSE

A164186

a.

Slide the 2 clamps and remove the No. 6 water by-pass hose from the No. 1 water by-pass pipe and fuel cooler.


Hide 23764A 11.REMOVE NO. 4 NOZZLE LEAKAGE PIPE

A164184

a.

Slide the clamp and disconnect the No. 2 fuel hose from the fuel cooler.


b.

Remove the union bolt and gasket.


c.

Remove the bolt and No. 4 nozzle leakage pipe.


Hide 23763 12.REMOVE NO. 3 NOZZLE LEAKAGE PIPE

A164185

a.

Slide the clamp and disconnect the No. 1 fuel hose from the fuel cooler.


b.

Remove the union bolt and gasket.


c.

Remove the bolt and No. 3 nozzle leakage pipe.


Hide 23920A 13.REMOVE FUEL COOLER

A164183

a.

Remove the 2 bolts and fuel cooler.


Hide 16295 14.REMOVE NO. 7 WATER BY-PASS HOSE

A164182

a.

Slide the clamp and remove the No. 7 water by-pass hose from the fuel cooler.