When using a vise, place aluminum plates between the part and vise.
When using a vise, do not overtighten it.
1.SECURE STEERING WHEEL
2.REMOVE FRONT WHEELS
45700 3.REMOVE STEERING DAMPER ASSEMBLY
Remove the 2 nuts.
Using SST, remove the steering damper assembly from the steering relay rod end sub-assembly LH.
Remove the 3 bolts, and remove the steering damper bracket with the steering damper assembly.
Secure the steering damper bracket in a vise.
Using SST, remove the steering damper assembly from the steering damper bracket.
45450 4.REMOVE STEERING RELAY ROD ASSEMBLY
Remove the 2 cotter pins and 2 castle nuts.
Using SST, remove the steering relay rod end sub-assembly LH from the pitman arm.
| *1 | Steering Knuckle Arm |
Using SST, remove the steering relay rod end from the steering knuckle arm.
45460A 5.REMOVE TIE ROD ASSEMBLY
Remove the 2 cotter pins and 2 castle nuts.
| *1 | Steering Knuckle Arm |
Using SST, remove the tie rod end sub-assembly from the steering knuckle arm.
44251 6.REMOVE PITMAN ARM
Remove the nut and spring washer.
| *1 | Cross Shaft |
| *2 | Pitman Arm |
| *a | Matchmark |
Place matchmarks on the pitman arm and cross shaft.
| *1 | Cross Shaft |
Using SST, remove the pitman arm from the cross shaft.
45047 7.REMOVE TIE ROD END SUB-ASSEMBLY LH
Loosen the bolt or nut to loosen the clamp.
Remove the tie rod end sub-assembly LH.
45046 8.REMOVE TIE ROD END SUB-ASSEMBLY RH
Use the same procedures described for the LH side.
45045 9.REMOVE STEERING RELAY ROD END SUB-ASSEMBLY LH
Loosen the bolt or nut to loosen the clamp.
Remove the steering relay rod end from the steering relay rod.
If necessary, disassemble the steering relay rod end sub-assembly as described below.
| *1 | Relay Rod Set Ring |
| *2 | Steering Link Joint Straight Screw Plug |
| *3 | Ball Stud Seat |
| *4 | Steering Link Joint Knob |
| *5 | Steering Link Joint Compression Spring |
| *6 | Steering Link Joint Spring Seat |
Remove the relay rod set ring.
Using a screwdriver, remove the steering link joint straight screw plug, 2 ball stud seats, steering link joint knob, steering link joint compression spring and steering link joint spring seat.
45044 10.REMOVE STEERING RELAY ROD END SUB-ASSEMBLY RH
Use the same procedures described for the LH side.