Use the same procedure for RHD and LHD vehicles.
The procedures listed below are for LHD vehicles.
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
67914 1.REMOVE FRONT DOOR SCUFF PLATE LH
67918A 2.REMOVE REAR DOOR SCUFF PLATE LH
62414A 3.REMOVE LOWER CENTER PILLAR GARNISH LH
73220 4.REMOVE FRONT SEAT OUTER BELT ASSEMBLY LH
Using a moulding remover D, detach the 2 claws and open the front seat outer belt shoulder anchor cover.
Loosen the bolt and disconnect the shoulder anchor of the front seat outer belt assembly LH from the vehicle body.
| *1 | Bolt A |
| *2 | Bolt B |
Remove the bolt (A).
Loosen the bolt (B), detach the guide, and then remove the front seat outer belt assembly LH.