Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM
RM25T0E _56 Audio / Visual / Telematics _029922 AUDIO / VIDEO _0137647 AUDIO AND VISUAL SYSTEM J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM  CD cannot be Inserted / Played or CD is Ejected Right After Insertion  


PROCEDURE

1.CHECK IF A PROPER CD IS INSERTED
a.

Make sure that the CD is an audio CD or a CD with an MP3 or WMA file, and that it is not deformed, flawed, stained, burred or otherwise defective.

OK:

CD is normal.


HINT:
·

Translucent or uniquely-shaped CDs cannot be played.

·

CDs with adhesive paper labels should not be played.

·

Commercial audio CDs can be played.

·

CD-DA files on CD-ROMs, CD-Rs and CD-RWs can be played.

·

MP3 and WMA files on CD-ROMs, CD-Rs and CD-RWs can be played.

·

For details on playable CDs, refer to the Owner's Manual.




Result:
Proceed to
OK
NG



OK

2.CHECK THAT CD IS INSERTED PROPERLY

NG

CHANGE CD

2.CHECK THAT CD IS INSERTED PROPERLY
a.

Check if the CD is inserted upside down.

OK:

CD is properly inserted.



Result:
Proceed to
OK
NG



OK

3.CHECK CD

NG

INSERT CD PROPERLY

3.CHECK CD
a.
I100151

Clean the CD by wiping it with a soft cloth from the inside to the outside in a radial direction.

OK:

Malfunction disappears.


NOTICE:

Do not use a conventional record cleaner or antistatic preservative.



Result:
Proceed to
OK
NG



OK

END (CD IS DIRTY)

NG

4.REPLACE CD WITH ANOTHER AND RECHECK
4.REPLACE CD WITH ANOTHER AND RECHECK
a.

Replace the CD with a known good one and check that the malfunction disappears.

OK:

Malfunction disappears.



Result:
Proceed to
OK
NG



OK

END (CD IS DEFECTIVE)

NG

REPLACE RADIO RECEIVER ASSEMBLY