85192 1.REMOVE WINDSHIELD WIPER ARM COVER
2.REMOVE WINDSHIELD WIPER ARM AND BLADE ASSEMBLY LH
3.REMOVE WINDSHIELD WIPER ARM AND BLADE ASSEMBLY RH
4.REMOVE WINDSHIELD GLASS
When reusing the windshield weatherstrip:
Pry the lip of the windshield weatherstrip outward from the interior part of the body flange.
Using suction cups and remove the back window glass.
Be careful not to drop the back window glass.
| *a | Cut |
When replacing the windshield weatherstrip:
Using a knife, cut off the windshield weatherstrip as shown in the illustration.
Push piano wire through from the interior.
Tie both wire endes to the wooden blocks or equivalent.
When separating the glass from the vehicle, be careful not to damage the vehicle paint or interior/exterior ornaments.
To prevent the instrument panel from being scratched when removing the glass, place a plastic sheet between the piano wire and instrument panel.
Cut through the adhesive by pulling the piano wire around the glass.
Using suction cups, remove the windshield glass.
Be careful not to drop the windshield glass.
5.REMOVE WINDSHIELD WEATHERSTRIP
Remove the windshield weatherstrip.
6.CLEAN VEHICLE BODY
Clean the contact surface of the vehicle body with cleaner.