Home › Vehicle Exterior › WINDOW / GLASS › WINDSHIELD GLASS(for Canvas Top)
RM25T0E _59 Vehicle Exterior _029935 WINDOW / GLASS _0137671 WINDSHIELD GLASS(for Canvas Top) A

WINDOW / GLASS  WINDSHIELD GLASS(for Canvas Top)  INSTALLATION  


PROCEDURE

Hide 56111 1.CLEAN WINDSHIELD GLASS

a.

Clean the outer circumference of the glass with non-residue solvent.

NOTICE:
·

Do not touch the glass surface after cleaning it.

·

Be careful not to damage the glass.

·

Even if using new glass, clean the glass with non-residue solvent.




Hide 56121 2.INSTALL WINDSHIELD WEATHERSTRIP

a.
B380536C01
1.979,1.906 2.625,1.594 true 1.75,1.823 2.063,2.021 0.313,0.198 10 false *1
*1 Working Cord


Install the weatherstrip to the windshield glass.


b.

Apply a working cord along the windshield weatherstrip groove, as shown in the illustration.


Hide 56111 3.INSTALL WINDSHIELD GLASS

a.
B380537C01
1.49,1.385 1.969,1.385 false 0.729,0.927 1.208,0.927 false 2.01,1.313 2.323,1.469 0.313,0.156 10 false *1 0.552,0.854 0.865,1.01 0.313,0.156 10 false *2
*1 Primer M
*2 Adhesive


Apply primer to the windshield weatherstrip on the surface with body as shown in the illustration.

NOTICE:
·

Do not apply too much primer.

·

Let the primer coating dry for 3 minutes or more.




b.
B380538

Install the windshield glass by pulling the cord from the room side, while pushing windshield weatherstrip from the outside with your open hand.


c.
B380539

To mark the glass fit in place, tap from the outside with your open hand.


d.
B380545C01
1.781,0.583 2.448,0.458 2.448,0.458 1.938,0.677 true 2.51,0.385 2.823,0.583 0.313,0.198 10 false *1
*1 Masking Tape


Put masking tape around the weatherstrip to protect the paint and glass.


e.

Conduct a leak test after the adhesive has completely hardened.


f.
B380546

Apply auto glass sealer to the weatherstrip lip as shown in the illustration.


g.
B380547

Remove the protected tape.


h.

Using a cleaner, clean the weatherstrip contacting surface of the body and glass.


Hide 4.INSTALL WINDSHIELD WIPER ARM AND BLADE ASSEMBLY LH

Hide 5.INSTALL WINDSHIELD WIPER ARM AND BLADE ASSEMBLY RH

Hide 85192 6.INSTALL WINDSHIELD WIPER ARM COVER

a.

Attach the 3 claws to install the windshield wiper arm cover.

HINT:

Use the same procedure for both windshield wiper arm covers.