Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
1.DRAIN ENGINE COOLANT (w/ Heater)
for 1GR-FE:
Click hereEngine / Hybrid System>1GR-FE (COOLING)>COOLANT>REPLACEMENT
for 1HZ:
Click hereEngine / Hybrid System>1HZ (COOLING)>COOLANT>REPLACEMENT
for 1VD-FTV:
Click hereEngine / Hybrid System>1VD-FTV (COOLING)>COOLANT>REPLACEMENT
87246A 2.DISCONNECT HEATER WATER HOSE OUTLET A (w/ Heater)
| *A | for 1GR-FE |
| *B | for 1HZ, 1VD-FTV |
Using pliers, grip the claws of the clip and slide the clip to disconnect the heater water outlet hose A.
Do not apply excessive force to the water hose and heater water outlet hose A.
Prepare a drain pan or cloth in case the coolant leaks.
87250 3.DISCONNECT HOSE AND VALVE ASSEMBLY (w/ Heater)
| *A | for 1GR-FE |
| *B | for 1HZ, 1VD-FTV |
| *1 | Water Valve Control Cable Sub-assembly |
Detach the clamp and disconnect the water valve control cable sub-assembly.
Remove the bolt.
Using pliers, grip the claws of the clip and slide the clip to disconnect the hose and valve assembly.
Do not apply excessive force to the water hose and hose and valve assembly.
Prepare a drain pan or cloth in case the coolant leaks.
88510 4.REMOVE COOLER UNIT ASSEMBLY
89179A 5.REMOVE AIRBAG SENSOR COVER (w/ Airbag System)
87107 6.REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY
Detach the clamps and remove the instrument panel wire harness.
Remove the 2 screws and instrument panel wire harness.
Remove the 2 bolts, nut and heater radiator unit sub-assembly.