67004 1.ADJUST REAR DOOR PANEL SUB-ASSEMBLY LH
Remove the front door scuff plate.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (for Semi-long Body)>REMOVAL
Remove the rear door scuff plate.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (for Semi-long Body)>REMOVAL
Remove the lower center pillar garnish.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (for Semi-long Body)>REMOVAL
Loosen the body's hinge bolts, nuts and adjust the door's position.
Tighten the body's hinge bolts and nuts after the adjustment.
Loosen the door's hinge bolts and adjust the door's position.
Tighten the body's hinge bolts after the adjustment.
69410B 2.ADJUST DOOR LOCK STRIKER
Using a T40 "TORX" socket wrench, adjust the striker position by slightly loosening the striker mounting screws and hitting the striker with a brass bar and hammer.