Home › Vehicle Interior › INTERIOR PANELS / TRIM › ROOF HEADLINING (for Semi-long Body) › 2014.08–2022.09
RM25T0E _58 Vehicle Interior _029934 INTERIOR PANELS / TRIM _0142493 ROOF HEADLINING(for Semi-long Body) A

INTERIOR PANELS / TRIM  ROOF HEADLINING(for Semi-long Body)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 67914 1.REMOVE FRONT DOOR SCUFF PLATE LH

a.
B386294C01
0.906,1.792 1.365,1.323 true 0.76,1.802 1.073,1.958 0.313,0.156 10 false *1
*1 Protective Tape


Put protective tape around the front door scuff plate LH.


b.

Using moulding remover D, detach the 4 clips and remove the front door scuff plate LH.


Hide 67913 2.REMOVE FRONT DOOR SCUFF PLATE RH

HINT:

Use the same procedure described for the LH side.


Hide 67918A 3.REMOVE REAR DOOR SCUFF PLATE LH

a.
B386295C01
2.448,1.896 2.802,2.021 false 2.854,1.969 3.167,2.125 0.313,0.156 10 false *1
*1 Protective Tape


Put protective tape around the rear door scuff plate LH.


b.

Using moulding remover D, detach the 2 clips and remove the rear door scuff plate LH.


Hide 67917A 4.REMOVE REAR DOOR SCUFF PLATE RH

HINT:

Use the same procedure described for the LH side.


Hide 62112A 5.REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH

a.
B386296

Remove the cap nut.


b.

Detach the clip and remove the cowl side trim sub-assembly LH.


Hide 62111A 6.REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 62414A 7.REMOVE LOWER CENTER PILLAR GARNISH LH

a.
B234861

Pull on both sides of the lower center pillar garnish LH and lift it up to remove it as shown in the illustration.


Hide 62413A 8.REMOVE LOWER CENTER PILLAR GARNISH RH

HINT:

Use the same procedure described for the LH side.


Hide 62316C 9.REMOVE FRONT DOOR REAR OPENING TRIM WEATHERSTRIP LH

a.
B234852

Remove the front door rear opening trim weatherstrip LH.


Hide 62315E 10.REMOVE FRONT DOOR REAR OPENING TRIM WEATHERSTRIP RH

HINT:

Use the same procedure described for the LH side.


Hide 62332C 11.REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

a.
B234854

Remove the rear door opening trim weatherstrip LH.


Hide 62331C 12.REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

HINT:

Use the same procedure described for the LH side.


Hide 55356B 13.REMOVE INSTRUMENT PANEL PLATE LH

Hide 55355B 14.REMOVE INSTRUMENT PANEL PLATE RH

Hide 74617A 15.REMOVE ASSIST GRIP PLUG

HINT:

Use the same procedure for all assist grip plugs.


a.
B234351C02
1.708,1.625 2.219,0.979 true 2.188,0.813 2.5,0.969 0.313,0.156 10 false *1
*1 Protective Tape


Using a screwdriver, detach the 2 claws and remove the assist grip plug.

HINT:

Tape the screwdriver tip before use.



Hide 74603 16.REMOVE FRONT ASSIST GRIP SUB-ASSEMBLY

HINT:

Use the same procedure for both front assist grip sub-assemblies.


a.
B234353

for Type A:

Remove the 2 screws and front assist grip sub-assembly.


b.

for Type B:

Using a T25 "TORX" wrench, remove the 2 screws and front assist grip sub-assembly.


Hide 62212 17.REMOVE FRONT PILLAR GARNISH LH

a.
B234354

Detach the claw and clip and remove the front pillar garnish LH.


Hide 62211 18.REMOVE FRONT PILLAR GARNISH RH

a.
B234355

w/o Assist Grip:

i.

Using a clip remover, remove the 2 clips.

HINT:

Tape the clip remover tip before use.




b.
B235605

Detach the claw and clip and remove the front pillar garnish RH.


Hide 74630E 19.REMOVE REAR ASSIST GRIP ASSEMBLY LH

a.
B234858

for Type A:

Remove the 2 screws and rear assist grip assembly LH.


b.

for Type B:

Using a T25 "TORX" wrench, remove the 2 screws and rear assist grip assembly LH.


Hide 74620C 20.REMOVE REAR ASSIST GRIP ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 62412 21.REMOVE CENTER PILLAR GARNISH LH

a.
B233858C02
0.875,0.885 1.885,1.156 true 0.708,0.802 1.021,0.958 0.313,0.156 10 false *1
*1 Protective Tape


Using a screwdriver, detach the 2 claws and open the front seat belt shoulder anchor cover.

HINT:

Tape the screwdriver tip before use.



b.
B233859

Loosen the bolt and disconnect the front seat belt shoulder anchor.


c.
B234859

Detach the clip, 2 guides and remove the center pillar garnish LH.


Hide 62411 22.REMOVE CENTER PILLAR GARNISH RH

HINT:

Use the same procedure described for the LH side.


Hide 62639A 23.REMOVE QUARTER PILLAR GARNISH LH

a.
B233858C02
0.875,0.885 1.885,1.156 true 0.708,0.802 1.021,0.958 0.313,0.156 10 false *1
*1 Protective Tape


Using a screwdriver, detach the 2 claws and open the rear seat belt shoulder anchor cover.

HINT:

Tape the screwdriver tip before use.



b.
B233859

Loosen the bolt and disconnect the rear seat belt shoulder anchor.


c.
B234862

Detach the 7 clips and 2 guides and remove the quarter pillar garnish LH.


Hide 62638A 24.REMOVE QUARTER PILLAR GARNISH RH

HINT:

Use the same procedure described for the LH side.


Hide 58573A 25.REMOVE REAR FLOOR MAT SUPPORT PLATE

a.
B234860

Remove the 4 screws and rear floor mat support plate.


Hide 64805 26.REMOVE BACK DOOR OPENING TRIM SUB-ASSEMBLY

a.
B234853

Remove the back door opening trim sub-assembly.


Hide 74617C 27.REMOVE ASSIST GRIP PLUG

HINT:

Use the same procedure for all assist grip plugs.


a.
B234351C02
1.708,1.625 2.219,0.979 true 2.188,0.813 2.5,0.969 0.313,0.156 10 false *1
*1 Protective Tape


Using a screwdriver, detach the 2 claws and remove the assist grip plug.

HINT:

Tape the screwdriver tip before use.



Hide 74610A 28.REMOVE ASSIST GRIP SUB-ASSEMBLY

a.
B234352

for Type A:

Remove the 2 screws and assist grip sub-assembly.


b.

for Type B:

Using a T25 "TORX" wrench, remove the 2 screws and assist grip sub-assembly.


Hide 74620B 29.REMOVE REAR ASSIST GRIP ASSEMBLY

HINT:

Use the same procedure for both front assist grip sub-assemblies.


a.
B234352

for Type A:

Remove the 2 screws and rear assist grip assembly.


b.

for Type B:

Using a T25 "TORX" wrench, remove the 2 screws and rear assist grip assembly.


Hide 74320 30.REMOVE VISOR ASSEMBLY LH

a.
B234361

Remove the 2 screws and visor assembly LH.


Hide 74310 31.REMOVE VISOR ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 74348 32.REMOVE VISOR HOLDER

HINT:

Use the same procedure for both visor holders.


a.
B234362

Remove the screw.


b.

Detach the clip and remove the visor holder.


Hide 87827 33.REMOVE INNER REAR VIEW MIRROR ABSORBER

Hide 87834 34.REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER

Hide 87810 35.REMOVE INNER REAR VIEW MIRROR ASSEMBLY

Hide 81241 36.REMOVE NO. 1 ROOM LIGHT LENS

Hide 81240 37.REMOVE NO. 1 ROOM LIGHT ASSEMBLY

Hide 81241A 38.REMOVE NO. 2 ROOM LIGHT LENS

Hide 81240D 39.REMOVE NO. 2 ROOM LIGHT ASSEMBLY

Hide 63310 40.REMOVE ROOF HEADLINING ASSEMBLY

a.
B235634

Fold down the upper part of the quarter window glass weatherstrip so that the roof headlining assembly can be removed.

HINT:

Use the same procedure for the other quarter window glass weatherstrip.



b.
B234855

Remove the 11 clips.


c.
B234863

Remove the roof headlining assembly from the back door as shown in the illustration.

NOTICE:
·

Make sure wrinkles do not form in the roof headlining assembly during removal.

·

Make sure that the roof headlining assembly does not get caught on anything as it may become bent or damaged.

·

Do not damage the roof headlining assembly or vehicle interior.