Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1.REMOVE FRONT WHEEL
48520 2.REMOVE FRONT SHOCK ABSORBER ASSEMBLY LH
48811 3.DISCONNECT FRONT STABILIZER BAR
Remove the bolt, nut and disconnect the front stabilizer bar from the front axle housing assembly.
48132 4.REMOVE FRONT COIL SPRING LH
Using SST, compress the front coil spring LH.
Do not use an impact wrench.
While lowering the front axle housing assembly, remove the front coil spring LH.
Remove SST from the front coil spring LH.
Do not use an impact wrench.
48310A 5.REMOVE FRONT SUSPENSION HOLLOW SPRING ASSEMBLY LH
Remove the 2 nuts and front suspension hollow spring assembly LH from the frame.
48331C 6.REMOVE FRONT SPRING BUMPER LH
Remove the 2 bolts and front spring bumper LH.