Home › Suspension › FRONT SUSPENSION › FRONT LEADING ARM
RM25T0E _53 Suspension _029909 FRONT SUSPENSION _0138033 FRONT LEADING ARM A

FRONT SUSPENSION  FRONT LEADING ARM  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 48654 1.INSTALL LOWER ARM BUSH

a.
C305822N01
2.052,1.135 2.708,1.135 false 2.792,1.063 3.156,1.271 0.365,0.208 10 false SST

Using SST and a press, install a new lower arm bush.

SST
09710-22042  (09710-02061)

NOTICE:

Install the lower arm bush in the direction shown in the illustration.



Hide 48610A 2.TEMPORARILY INSTALL FRONT LEADING ARM ASSEMBLY

a.

Temporarily install the front leading arm assembly to the front axle housing assembly with 2 new bolts, 2 washers and 2 nuts.


b.

Temporarily install the front leading arm assembly to the frame with a new bolt, washers and nut.


Hide 3.INSTALL FRONT WHEEL

Hide 48610A 5.TIGHTEN FRONT LEADING ARM ASSEMBLY

C363392

a.

Tighten the 2 bolts and 2 nuts.

Torque:
171.6 N*m (1750 kgf*cm, 127 ft.*lbf)

NOTICE:

Since a stopper nut is used, tighten the bolt.



b.
C305819

Tighten the bolt and nut.

Torque:
176.5 N*m (1800 kgf*cm, 130 ft.*lbf)