Home › Brake › PARKING BRAKE › PARKING BRAKE LEVER
RM25T0E _54 Brake _029919 PARKING BRAKE _0138073 PARKING BRAKE LEVER A

PARKING BRAKE  PARKING BRAKE LEVER  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 84550 1.INSTALL PARKING BRAKE SWITCH ASSEMBLY

Hide 46451C 2.INSTALL NO. 1 PARKING BRAKE CABLE SUPPORT BRACKET

a.
C304605C01
1.01,2.646 1.563,2.646 false 0.833,2.552 1.146,2.75 0.313,0.198 10 false *a
*a Claw


Attach the claw of the parking brake cable to the No. 1 parking brake cable support bracket as shown in the illustration.


b.
C304604

Install the No. 1 parking brake cable support bracket with the 2 bolts.

Torque:
12.75 N*m (130 kgf*cm, 9 ft.*lbf)


Hide 46410 3.INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY

a.

Pass the parking brake cable through the parking brake lever assembly.


b.
C304603

Bend the parking brake lever claw.


Hide 46210 4.INSTALL PARKING BRAKE LEVER ASSEMBLY

a.
C304600

Install the parking brake lever assembly with the 2 bolts.

Torque:
12.75 N*m (130 kgf*cm, 9 ft.*lbf)


b.

Temporarily install the adjusting nut and the lock nut to the parking brake cable.


c.

Connect the parking brake switch connector.


Hide 5.ADJUST PARKING BRAKE

Hide 46243 6.INSTALL PARKING BRAKE LEVER COVER

a.

Install the parking brake lever cover to the parking brake lever assembly.


Hide 58901A 7.INSTALL REAR CONSOLE BOX SUB-ASSEMBLY