Home › Brake › PARKING BRAKE › PARKING BRAKE ASSEMBLY › 2014.08–2016.08
RM25T0E _54 Brake _029919 PARKING BRAKE _0138075 PARKING BRAKE ASSEMBLY A

PARKING BRAKE  PARKING BRAKE ASSEMBLY  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 47629 1.INSTALL PARKING BRAKE BELLCRANK BRACKET

a.
C306759

Install the parking brake bellcrank bracket and pin to the parking brake bell crank LH with a new C-washer as shown in the illustration.


Hide 47634 2.INSTALL PARKING BRAKE BELLCRANK BOOT

a.
C306761C01
0,0 0,0 false
V100155

Lithium soap base glycol grease


Apply a light coat of lithium soap base glycol grease to the parking brake bellcrank boot.

HINT:

Apply at least 0.2 to 0.25 g (0.007 to 0.008 oz.) of lithium soap base glycol grease to the parking brake bellcrank boot.



b.

Install the parking brake bellcrank boot to the parking brake bellcrank bracket.


Hide 47639A 3.INSTALL PARKING BRAKE BELLCRANK STOPPER BOLT

a.
C305452

Install the parking brake bellcrank stopper bolt and nut to the parking brake bell crank LH.

HINT:

The nut is tightened in a later step when adjusting the parking brake lever travel.



Hide 47625B 4.INSTALL PARKING BRAKE BELL CRANK LH

a.
C305269

Install the parking brake bell crank LH with the 2 bolts.

Torque:
12.5 N*m (127 kgf*cm, 9 ft.*lbf)


Hide 47623B 5.INSTALL PARKING BRAKE BELL CRANK RETURN TENSION SPRING

a.
C305268

Install the 2 parking brake bell crank return tension springs.


Hide 46410 6.CONNECT NO. 1 PARKING BRAKE CABLE ASSEMBLY

a.
C305267

Connect the No. 1 parking brake cable assembly with the pin and a new clip to the parking brake bell crank LH.


Hide 47616A 7.INSTALL PARKING BRAKE WIRE

a.
C306760

Install the parking brake wire with the pin and a new C-washer to the parking brake bell crank LH.


Hide 47447E 8.INSTALL PARKING BRAKE SHOE HOLD DOWN SPRING PIN (for Front Side)

a.
C305648

Install the parking brake shoe hold down spring pin.


Hide 47447F 9.INSTALL PARKING BRAKE SHOE HOLD DOWN SPRING PIN (for Rear Side)

a.
C305649

Install the parking brake shoe hold down spring pin.


Hide 47459B 10.INSTALL PARKING BRAKE SHOE GUIDE PLATE SET BOLT

a.
C305271

Install the parking brake shoe guide plate set bolt and parking brake shoe guide plate.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


Hide 11.APPLY HIGH-TEMPERATURE GREASE

a.
C305272C02
0,0 0,0 false
V100155

High-temperature grease


Apply a light coat of high-temperature grease to the areas of the backing plate which make contact with the shoe as shown in the illustration.


Hide 47612 12.INSTALL PARKING BRAKE SHOE LEVER LH

a.

Apply a light coat of high-temperature grease to the areas of the parking brake shoe lever LH which make contact with the No. 1 parking brake shoe assembly LH.


b.
C305273

Using a feeler gauge, measure the clearance between the No. 1 parking brake shoe assembly LH and parking brake shoe lever LH.

Standard clearance:

Less than 0.25 mm (0.00984 in.)


If the clearance is not within the specification, replace the shim with one of a different thickness so that the clearance is within the specification.

Standard Shim:
Shim Thickness Shim Thickness
0.3 mm (0.0118 in.) 0.6 mm (0.0236 in.)
0.4 mm (0.0157 in.) 0.9 mm (0.0354 in.)
0.5 mm (0.0197 in.) -



c.
C305274

Install the parking brake shoe lever and shim to the No. 1 parking brake shoe assembly LH with a new C-washer as shown in the illustration.


Hide 47616A 13.CONNECT PARKING BRAKE WIRE

a.
C314342

Using needle-nose pliers, connect the parking brake wire to the parking brake shoe lever LH as shown in the illustration.

NOTICE:

Be careful not to damage the parking brake wire.



Hide 46550A 14.INSTALL NO. 3 PARKING BRAKE SHOE RETURN TENSION SPRING

a.
C305262

Install the No. 3 parking brake shoe return tension spring to the No. 1 parking brake shoe assembly LH.


b.
C305261

Install the No. 2 parking brake shoe assembly LH to the No. 3 parking brake shoe return tension spring.


Hide 47406A 15.INSTALL PARKING BRAKE SHOE ADJUSTING SCREW SET

a.
C305454C01
1.469,2.323 1.625,2.281 false
V100155

High-temperature grease


Apply a light coat of high-temperature grease to the areas of the shoe adjusting screw set shown in the illustration.


b.
C305260

Install the parking brake shoe adjusting screw set.


Hide 46580 16.INSTALL NO. 1 PARKING BRAKE SHOE ASSEMBLY LH

a.
C305647

Pull the No. 1 parking brake shoe assembly LH and No. 2 parking brake shoe assembly LH open by hand, and then align them with the backing plate.


b.
C305259

Install the No. 1 parking brake shoe assembly LH to the backing plate with the 2 parking brake shoe hold down spring cups and parking brake shoe hold down spring.


Hide 47614 17.INSTALL PARKING BRAKE SHOE STRUT LH

a.
C305258

Install the parking brake shoe strut and parking brake shoe strut compression spring.


b.
C305645

Install the No. 2 parking brake shoe assembly LH in the correct position.


Hide 46590 18.INSTALL NO. 2 PARKING BRAKE SHOE ASSEMBLY LH

a.
C305257

Install the No. 2 parking brake shoe assembly LH to the backing plate with the 2 parking brake shoe hold down spring cups and parking brake shoe hold down spring.


Hide 46550E 19.INSTALL NO. 2 PARKING BRAKE SHOE RETURN TENSION SPRING

a.
C305256

Install the 2 No. 2 parking brake shoe return tension springs.


Hide 46550G 20.INSTALL NO. 1 PARKING BRAKE SHOE RETURN TENSION SPRING

a.
C305254

Install the No. 1 parking brake shoe return tension spring.


Hide 21.CHECK PARKING BRAKE INSTALLATION

a.

Check that each part is installed properly.

C305275C01
1.708,0.125 2.021,0.323 0.313,0.198 10 false *A 5.021,0.125 5.333,0.323 0.313,0.198 10 false *B 2.24,3.083 2.552,3.281 0.313,0.198 10 false *a 4.74,3.083 5.052,3.281 0.313,0.198 10 false *a
*A for LH Side *B for RH Side
*a Front - -


NOTICE:

There should be no oil or grease adhering to the friction surfaces of the shoe lining and disc.



Hide 23.INSTALL REAR DISC BRAKE CYLINDER ASSEMBLY LH

a.
C305255

Install the rear disc brake cylinder assembly LH with the 2 bolts.

Torque:
103 N*m (1050 kgf*cm, 76 ft.*lbf)


Hide 24.ADJUST PARKING BRAKE

Hide 25.INSTALL REAR WHEEL