87120 1.INSTALL REAR HEATER ASSEMBLY
Install the rear heater assembly with the 3 bolts.
Connect the connector.
87255E 2.CONNECT REAR HEATER WATER INLET HOSE E
| *a | View A |
| *b | Rear Heater Water Inlet Hose E Paint Mark (White) |
| *c | Clip Installation Angle |
| *d | RH Side |
| *e | Front Side |
Connect the rear heater water inlet hose E with the paint mark (white) facing down and attach the clip within the area shown in the illustration.
Do not apply excessive force to the rear heater water inlet hose E.
87256A 3.CONNECT REAR HEATER WATER OUTLET HOSE A
| *a | View A |
| *b | Rear Heater Water Outlet Hose A Paint Mark (White) |
| *c | Clip Installation Angle (45°) |
| *d | RH Side |
| *e | Front Side |
Connect the rear heater water outlet hose A with the paint mark (white) facing right down and attach the clip within the area shown in the illustration.
Do not apply excessive force to the rear heater water outlet hose E.
58901A 4.INSTALL REAR CONSOLE BOX SUB-ASSEMBLY
Connect the connector.
Install the rear console box sub-assembly with the 7 screws.
87123 5.INSTALL HEATER KNOB
Install the heater knob.
6.ADD ENGINE COOLANT
for 1GR-FE:
Click hereEngine / Hybrid System>1GR-FE (COOLING)>COOLANT>REPLACEMENT
for 1HZ:
Click hereEngine / Hybrid System>1HZ (COOLING)>COOLANT>REPLACEMENT
7.WARM UP ENGINE
8.CHECK FOR ENGINE COOLANT LEAK
for 1GR-FE:
Click hereEngine / Hybrid System>1GR-FE (COOLING)>COOLANT>REPLACEMENT
for 1HZ:
Click hereEngine / Hybrid System>1HZ (COOLING)>COOLING SYSTEM>ON-VEHICLE INSPECTION