Use the same procedures for the LH side and RH side.
The procedures listed below are for the LH side.
67918A 1.REMOVE REAR DOOR SCUFF PLATE LH
62552F 2.REMOVE REAR SEAT SIDE GARNISH LH
64707D 3.REMOVE QUARTER TRIM JACK COVER SUB-ASSEMBLY
62512 4.REMOVE QUARTER INSIDE TRIM BOARD
Refer to the procedures up to "QUARTER INSIDE TRIM BOARD LH" (for LH side) (see page Audio / Visual / Telematics>AUDIO / VIDEO>QUARTER TRIM SPEAKER(for 5 Door)>REMOVAL).
Refer to the procedures up to "QUARTER INSIDE TRIM BOARD RH" (for RH side) (see page Audio / Visual / Telematics>AUDIO / VIDEO>QUARTER TRIM SPEAKER(for 5 Door)>REMOVAL).
62334A 5.REMOVE REAR DOOR OPENING TRIM LH
73370 6.DISCONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH
Using a screwdriver, detach the 2 claws and open the seat belt anchor cover.
Tape the screwdriver tip before use.
Remove the bolt and disconnect the seat belt shoulder anchor.
The bolt is built into the anchor and cannot be removed form the anchor.
62584A 7.REMOVE UPPER QUARTER PILLAR COVER LH
Detach the 3 clips and 4 claws, and remove the upper quarter pillar cover LH.
8.REMOVE QUARTER WINDOW GLASS
Remove the 4 nuts, 2 screws and quarter window glass.