Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
84052 1.INSTALL UNLOCK WARNING SWITCH ASSEMBLY
Attach the 2 claws to install the unlock warning switch assembly to the steering column upper with switch bracket assembly.
Move the unlock warning switch assembly in the direction indicated by the arrow in the illustration to install it.
Attach the connector.
2.INSTALL IGNITION SWITCH LOCK CYLINDER ASSEMBLY
89783 3.INSTALL TRANSPONDER KEY AMPLIFIER (w/ Engine Immobiliser System)
84650 4.INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
45286B 5.INSTALL UPPER STEERING COLUMN COVER
45287 6.INSTALL LOWER STEERING COLUMN COVER
55480D 7.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY